Mineral and Textile and Inedible Plant and Animal Materials

Mineral and Textile and Inedible Plant and Animal Materials - page 37 - ECeurope Market

• 
  Air Hardening Tool Steel En X100crmov5 Material Supply

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 87.00 Dollar US$

  EN X100CrMoV5 material is an air-hardening tool steel, corresponding to the European grade of American A2 steel. It belongs to the high-carbon, medium-chromium, low-deformation cold work die material category. Its hardenability and wear resistance ar...

• 
  En Nf X100crmov5 Steel Preheating Process

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 88.00 Dollar US$

  Preheating Treatment The phase composition, hardness, and microstructure of EN NF X100CrMoV5 steel before and after annealing are shown in Table 2-13-4. It should be noted that: (1) The annealing heating and holding time is 1-2 hours after all the fu...

• 
  High Performance X100crmov5 Tool Steel For Stamping Dies

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 90.00 Dollar US$

  High-performance X100CrMoV5 tool steel for stamping dies is a premium material specifically designed to meet the demands of modern industry. This tool steel is renowned for its exceptional wear resistance and high strength, maintaining stable perform...

• 
  Nf X100crmov5 Material In The Annealed State Exhibits Excellent Machinability

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 103.00 Dollar US$

  NF X100CrMoV5 material is an internationally recognized high-performance cold work die steel, belonging to the high-carbon, medium-chromium tool steel series. Its ISO standard designation is X100CrMoV5-1 (1.2363), American standard AISI A2, Japanese ...

• 
  Nf X100crmov5 Steel Surface Treatment Process

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 79.00 Dollar US$

  NF X100CrMoV5 steel is a typical hot work die steel, possessing excellent high-temperature strength, wear resistance, thermal fatigue resistance, and toughness. 1. Nitriding Treatment This is the most common and effective surface treatment process fo...

• 
  High Quality 1 2363 Material Exhibits Minimal Deformation During Heat Treatment

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 103.00 Dollar US$

  1.2363 material, as a high-carbon, medium-chromium cold work die steel, exhibits minimal deformation during heat treatment primarily due to its compositional design, microstructure, and suitable processing techniques, meeting the dimensional stabilit...




• 
  Din 1 2363 Mold Steel Key Influencing Factors And Control Points

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 102.00 Dollar US$

  Key Influencing Factors and Control Points for DIN 1.2363 Mold Steel Quenching Process: Heating rate, holding time, and cooling method determine thermal stress and microstructure transformation. Step heating (e.g., 650℃/850℃ dual-stage), air cooling ...

• 
  Stock 1 2363 Steel Suggestions For Process Optimization

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 101.00 Dollar US$

  1.2363 Steel Process Optimization Recommendations Preheating and Quenching: Two-stage preheating at 650℃/850℃, austenitization at 940–960℃, holding coefficient 1.5–2 min/mm, air cooling to room temperature followed by immediate tempering. Tempering C...

• 
  W Nr 1 2363 Steel Processing And Manufacturing Considerations

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 100.00 Dollar US$

  In design and manufacturing, W-Nr.1.2363 steel must be combined with optimized heat treatment processes, precision grinding, and rigorous testing to fully realize its potential and produce high-end gears with ultra-long service life and reliable perf...

• 
  X100crmov5 1 Steel Suitable For High Compressive Strength In Industrial Molds

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 87.00 Dollar US$

  X100CrMoV5-1 steel is a high-carbon, high-chromium cold work die steel, its material properties inherently designed for compressive strength: 1️⃣ High carbon + high chromium → extremely high matrix strength 2️⃣ High hardness after quenching, strong l...

• 
  Durable En Din X100crmov5 1 Steel With Excellent Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 86.00 Dollar US$

  EN DIN X100CrMoV5-1 steel belongs to the tool and die steel category and possesses a series of excellent performance characteristics: High wear resistance: After heat treatment, EN DIN X100CrMoV5-1 steel can achieve a hardness of 57~62HRC, exhibiting...

• 
  The Effects Of Carefully Formulated Chemical Composition Din X100crmov5 1 Steel

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - January 26, 2026 - 88.00 Dollar US$

  The chemical composition of DIN X100CrMoV5-1 steel has been carefully formulated to ensure its superior performance: 1. Carbon is the main alloying element in DIN X100CrMoV5-1 steel, enhancing its hardness and strength. 2. Silicon helps improve the o...