Mineral and Textile and Inedible Plant and Animal Materials

Mineral and Textile and Inedible Plant and Animal Materials - page 18 - ECeurope Market

• 
  Wholesale Skd2 Tool Steel Bar Impact Resistance

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 82.00 Dollar US$

  SKD2 tool steel bars possess exceptional impact resistance—a characteristic that enables them to perform outstandingly across a wide range of industrial applications. As a high-strength alloy tool steel, SKD2 is renowned for its superior toughness an...

• 
  Bulk Supply D6 Alloy Steel Flat Bar Annealing Process

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 85.00 Dollar US$

  D6 Alloy Steel Flat Bar is a high-carbon, high-chromium cold-work tool steel. Its typical chemical composition consists of: Carbon 2.00%–2.20%, Chromium 11.50%–12.50%, Tungsten 0.60%–0.90%, Manganese 0.20%–0.40%, and Silicon 0.20%–0.40%. This specifi...

• 
  Aisi D6 Cold Work Tool Steel Slow Cooling After Forging

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 83.00 Dollar US$

  Upon the completion of forging, AISI D6 cold-work tool steel requires a slow-cooling treatment. Renowned for its high-carbon, high-chromium chemical composition, this steel exhibits exceptional wear resistance and high hardness, making it widely util...

• 
  Jis Skd2 Steel Bars Stamping Dies And Blanking Molds

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 85.00 Dollar US$

  Stamping and Blanking Dies JIS SKD2 steel bars demonstrate exceptional performance in blanking and stamping applications, making them particularly well-suited for scenarios demanding superior edge retention and wear resistance. According to actual ca...

• 
  Machinable Skd2 Mold Steel Heat Treatment Considerations

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 84.00 Dollar US$

  Precautions for the Heat Treatment of SKD2 Mold Steel In practical operations, to ensure that the heat treatment of SKD2 mold steel achieves optimal results, the following points must be observed: - Uniform Heating: Throughout the entire heat treatme...

• 
  Export Jis Skd2 Tool Steel Polishing Process

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 83.00 Dollar US$

  JIS SKD2 tool steel is a high-carbon, high-chromium cold-work die steel that achieves a hardness of 60–64 HRC after heat treatment. Due to its high hardness and the presence of a significant volume of hard carbides, it presents considerable challenge...




• 
  Precautions For Using Jis Skd2 Material

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 82.00 Dollar US$

  Precautions for Using JIS SKD2 Material Toughness Limitations: JIS SKD2 material possesses relatively low impact toughness and is therefore unsuitable for applications involving heavy impact loads. If higher toughness is required, alternative grades ...

• 
  How To Heat Treat Skd2 Steel Achieve Maximum Wear Resistance

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 81.00 Dollar US$

  SKD2 steel is a high-carbon, high-chromium cold-work tool steel widely utilized in the manufacture of stamping dies, shearing tools, and other components requiring high strength and exceptional wear resistance. However, to fully realize the performan...

• 
  Jis Skd2 Steel Applications A Comprehensive Guide

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 80.00 Dollar US$

  JIS SKD2 steel is a high-carbon, high-chromium cold-work tool steel defined by the Japanese standard JIS G 4404-2006; it is classified as a ledeburitic steel. The composition of JIS SKD2 is engineered to provide exceptionally high wear resistance, go...

• 
  Common Defects And Prevention In The Forging Process Of D6 Alloy Steel

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 71.00 Dollar US$

  Common Defects and Prevention Strategies in the Forging of D6 Alloy Steel - Forging Cracks: Insufficient preheating, excessively low finishing temperature, or overly rapid cooling rate → Implement strict staged heating, maintain a finishing temperatu...

• 
  High Hardness D6 Material Cold Work Tool Steel Supply

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 72.00 Dollar US$

  D6 material is a high-carbon, high-chromium cold-work tool steel characterized primarily by its exceptional hardness, superior wear resistance, and excellent dimensional stability; it is classified as a typical ledeburitic, high-wear-resistant tool s...

• 
  Astm D6 Steel Chemical Composition Core Role

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - May 18, 2026 - 72.00 Dollar US$

  The chemical composition of ASTM D6 steel plays a pivotal role in determining its properties and applications. As a high-performance alloy steel, the precise balance of its chemical constituents directly dictates the material's mechanical properties,...