14 USA 
7 China 
4 Vietnam 
2 Taiwan 
1 Iran 
1 Singapore 
1 Germany 
1 Australia 
1 Indonesia 
industrial titanium carbide alloy drive wheels Photos Catalog - page 20 - ECeurope Market
-
Titanium Carbide Guide Wheel High PrecisionAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 1, 2025 - 13.50 Dollar US$The titanium carbide-based cemented carbide guide wheel exhibits exceptional thermal shock resistance, maintaining structural integrity even under rapid temperature fluctuations from room temperature to 300°C and back. This characteristic makes it hi...
-
Reduce Sintering Shrinkage Rate Of Titanium Carbide PowderAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 2, 2025 - 13.60 Dollar US$Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components. Co...
-
Titanium Carbide Rods Are Wear And Heat ResistantAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 3, 2025 - 12.80 Dollar US$Titanium carbide-based cemented carbide round bars, as a critical material in high-end manufacturing, exhibit outstanding corrosion resistance, demonstrating minimal susceptibility to rust or degradation in humid, acidic, or alkaline environments. Wi...
-
Highly Fluid Titanium Carbide PowderAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 3, 2025 - 13.60 Dollar US$Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable a...
-
High Purity Titanium Carbide Rods Have Small Dimensional TolerancesAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 12.80 Dollar US$Hard alloy titanium carbide round rods can be customized into products with different properties by adjusting the titanium carbide content (usually 70%-90%) and the proportion of binder. When the titanium carbide content is relatively high, it has st...
-
Titanium Carbide Hard Rods Special For Extrusion DiesAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 12.80 Dollar US$Hard alloy titanium carbide round rods can be tailored to achieve specific performance characteristics by adjusting the titanium carbide content (typically 70%–90%) and the binder proportion. Higher titanium carbide content enhances wear resistance, ...
-
Titanium Carbide Powder For Automated FormingAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 13.60 Dollar US$This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K), and can be used to make conductive ceramics, heating elements, etc. After being compounded with copper...
-
Wear Resistant Titanium Carbide Rods Materials For Bushing ManufacturingAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 10, 2025 - 12.80 Dollar US$The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise regulation of sintering temperature (about 1500℃), every step affects the final performance. The finished ...
-
Titanium Carbide Rods Highly Efficient In Mechanical ProcessingAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 10, 2025 - 12.80 Dollar US$The manufacturing process of this round bar is highly stringent, with meticulous control over each stage—from the purity of titanium carbide powder (≥99.5%) to the precise regulation of sintering temperature (approximately 1500 °C)—all of which direc...
-
Titanium Carbide Guide Wheel High HardnessAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 10, 2025 - 13.50 Dollar US$The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight...
-
Fill The Titanium Carbide Powder Evenly Without Dead CornersAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 10, 2025 - 13.60 Dollar US$Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperature of alumina ceramics, thus saving energy costs. Compared with other ceramic powders (such as silicon ...
-
High Hardness Titanium Carbide Rods Superior Cutting Edge MaterialAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 16, 2025 - 12.80 Dollar US$The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum alloy and copper alloy, the phenomenon of "tool sticking" is less likely to occur, ensuring a smooth pro...
-
Titanium Carbide Hard Rods Suitable For Chemical PartsAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 16, 2025 - 12.80 Dollar US$The anti-adhesion performance of titanium carbide round rods fabricated from cemented carbide is exceptional. When machining sticky materials such as aluminum and copper alloys, these rods exhibit a significantly reduced tendency for built-up edge fo...
-
High Performance Titanium Carbide PowderAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 16, 2025 - 13.60 Dollar US$After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composite materials, which have both hardness and toughness. This composite material is widely used in sports ...
-
Titanium Carbide Powder For Photovoltaic Cutting ToolsAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 18, 2025 - 13.60 Dollar US$Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite powders and customize materials with different properties. For instance, after adding 10% tungsten carbi...
-
Wear Resistant Titanium Carbide Rods Superior Parts ManufacturingAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 22, 2025 - 12.80 Dollar US$Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, which can significantly shorten the processing time in mass production. Its microstructure is uniform, and ...
-
Titanium Carbide Hard Rods Available On DemandAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 22, 2025 - 12.80 Dollar US$Compared with traditional high-speed steel, hard alloy titanium carbide round bars enable a 3 to 5 times increase in cutting speed, significantly reducing processing time in mass production. These materials exhibit a uniform microstructure with grain...
-
Improve The Processing Efficiency Of Silicon Wafers With Titanium Carbide PowderAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 22, 2025 - 13.60 Dollar US$Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite powders and customize materials with different properties. For instance, after adding 10% tungsten carbi...
-
High Strength Titanium Carbide Rods Machine Tool PartsAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 24, 2025 - 12.80 Dollar US$Titanium carbide round rods of cemented carbide are high-performance rods made by powder metallurgy process, with titanium carbide as the main hard phase and cobalt or nickel as the binder phase. Its hardness is as high as over HRC85, and its wear re...
-
Titanium Carbide Rods Special For Metal CuttingAlloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 24, 2025 - 12.80 Dollar US$Titanium carbide round rods made of cemented carbide are high-performance components fabricated through a powder metallurgy process, with titanium carbide serving as the primary hard phase and cobalt or nickel as the binder phase. These rods exhibit ...