Titanium Carbide Hard Rods Suitable For Chemical Parts - China

The anti-adhesion performance of titanium carbide round rods fabricated from cemented carbide is exceptional.

When machining sticky materials such as aluminum and copper alloys, these rods exhibit a significantly reduced tendency for built-up edge formation, thereby ensuring a smooth machined surface.

Their surface properties can be further enhanced through coating technologies—such as TiAlN coatings—which improve wear resistance and oxidation resistance, extending tool life by over 50%.

In the medical device industry, they are commonly used in the manufacture of orthopedic surgical instruments, offering not only excellent cutting sharpness but also the ability to withstand repeated high-temperature sterilization without deformation.

The length of the round rod can be customized within a range of 100 mm to 1000 mm and is amenable to secondary precision processes such as grinding and wire electrical discharge machining, enabling the production of components with complex geometries.

Although the initial cost is higher than that of conventional cemented carbide, the overall cost per unit product is lower when accounting for extended service life and improved processing efficiency.

In gear manufacturing, hobs produced from this material ensure gear tooth profile accuracy at ISO quality grade 6 or higher, meeting the stringent requirements of high-performance mechanical transmission systems.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.