Titanium Carbide Hard Rods Special For Extrusion Dies - China

Hard alloy titanium carbide round rods can be tailored to achieve specific performance characteristics by adjusting the titanium carbide content (typically 70%–90%) and the binder proportion.

Higher titanium carbide content enhances wear resistance, making the material suitable for rough machining applications, while an increased binder ratio improves toughness, rendering it more appropriate for precision machining.

With a density of only 6.5 g/cm³, these rods are approximately 20% lighter than tungsten carbide counterparts of comparable dimensions, which makes them ideal for lightweight tooling solutions.

In the 3C electronics industry, they are widely employed in the machining of high-precision components such as mobile phone frames and laptop housings, ensuring scratch-free surfaces and minimal dimensional deviations.

The rod length is customizable, ranging from 100 mm to 1000 mm, and the material is amenable to secondary processing techniques—including precision grinding and wire cutting—enabling the production of complex geometries.

Although the initial cost exceeds that of conventional cemented carbide, the extended service life and superior processing efficiency result in a lower unit production cost over time.

In gear manufacturing, hobs fabricated from this material can achieve gear tooth surface accuracy of grade 6 or higher, fulfilling the stringent requirements of advanced mechanical transmission systems.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.