W6mo5cr4v2 Applications Guide Where M2 High Speed Steel Performs Best - China

W6Mo5Cr4V2 steel applications cover almost every branch of the cutting tool and cold forming industry.

As the GB standard grade equivalent to AISI M2, DIN 1.3343 and JIS SKH51, this tungsten molybdenum high speed steel is chosen wherever tools must stay hard and sharp at elevated working temperatures.

1 - Cutting Tool Applications

- Twist drills: the largest single use, W6Mo5Cr4V2 drills keep cutting through tough alloy steels and stainless grades

- End mills and slot cutters: fine carbide distribution supports sharp edges and smooth finishes

- Taps and dies: balanced hardness and toughness prevent tooth chipping

- Reamers and broaches: stable 63-65 HRC hardness gives consistent hole sizes over long runs

- Saw blades: band saw strips and circular saws hold their edge in high volume cutting 2 - Forming Tool Applications

- Cold punches and blanking dies: wear resistance from vanadium carbides extends tool life

- Thread rolling dies: surface quality maintained through millions of cycles

- Powder forming and pelletizing tools: resistance to abrasive feed materials 3 - Machine Component Applications

- Wear plates and guides in high speed machinery

- Gauge and measuring tool bodies needing dimensional stability

- Lathe centers and machine spindles in high load service 4 - Heat Treatment Reference for Applications

- Hardening: 1210-1230 C, quench in oil, salt bath or vacuum

- Triple tempering at 540-560 C

- Working hardness: 63-65 HRC, red hardness maintained up to 600 C Why engineers specify W6Mo5Cr4V2 over carbon tool steel: cutting speeds can be raised 2 to 3 times, tool life between regrinds extends dramatically, and tools survive the heat generated in modern CNC machining.

For high demand polishing work, ESR remelted W6Mo5Cr4V2 offers cleaner microstructure and isotropic toughness.

Songshun supplies W6Mo5Cr4V2 in round bar 8-300mm, flat bar, plate and forged block, all with EN 10204 3.1 certificates, ultrasonic testing and full heat treatment support from our engineer team.

Songshun Company Website: https: //songshunsteel.

com/

Company Contact:

• Posted By: Dongguan Songshun Mould Steel Co., Ltd.

• Phone: 076985475596

• Address: 1st Floor, No. 1, Dongda Fourth Street, Shatou Community, Chang'an Town, Dongguan , Guangdong , China

• Email:

• Website: https://songshunsteel.com/

• Business Description: Established in 2009,Songshun Steel supplies a wide range of carbon, alloy and tool steel products, including high speed tool steel, cold work tool steel, hot work tool steel, plastic mould steel, engineering steel and machine structural steel etc.
  
  After more than 10 years development and growing, Songshun Steel becomes one comprehensive special steel factory, stockist and exporter.
  
  Combined with experienced exporting team and professional technical knowledge, Songshun Steel offers both technical advice and support, as well as global professional steel solution and service.
  
  Due to satisfactory reliable quality and professional service, Songshun expands our market worldwide, such as Colombia, Chile, Spain, Turkey, Iran, Vietnam, Malaysia ,UAE, Canada, Brazil, Mexico and so on.
  
  Songshun specialized in Special Steel for almost 20 years.
  
  We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.
  
  Welcome your contact 24 hours a day!!!
  
  Skype/Whatsapp/We chat: +86-18269260283
  
  Songshun Tiktok: mikizhuo
  
  Songshun Facebook: Songshun Steel
  
  Songshun YouTube: MiKi Zhuo
  
  songshunmoldsteel414 04340