Mineral and Textile and Inedible Plant and Animal Materials

Mineral and Textile and Inedible Plant and Animal Materials - page 48 - ECeurope Market

• 
  Wear Resistant Titanium Carbide Rods Materials For Bushing Manufacturing

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 10, 2025 - 12.80 Dollar US$

  The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise regulation of sintering temperature (about 1500℃), every step affects the final performance. The finished ...

• 
  Bs 805m20 Alloy Steel Export Supply Status

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - December 9, 2025 - 307.00 Dollar US$

  The condition of supply (M) is not the same as the final use condition: The M condition merely represents the raw material's supply condition; its properties (especially toughness and machinability) have not yet reached the steel's potential. BS 805M...

• 
  Common Final Bs 805m20 Plate Heat Treatment Process

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - December 9, 2025 - 405.00 Dollar US$

  Heat Treatment Process and Performance Control The BS 805M20 plate achieves precise performance control through heat treatment processes: Carburizing: The surface carburized layer depth is typically 0.8-1.2 mm, with optimized carbon concentration gra...

• 
  High Quality Ss14 2506 Steel Chemical Composition And Alloy Design

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - December 9, 2025 - 401.00 Dollar US$

  Chemical Composition and Alloy Design The chemical composition of SS14 2506 steel is optimized to balance strength and toughness requirements: Carbon (C): 0.17%-0.23%, as the core element for carburizing, improving surface hardness and wear resistanc...

• 
  805m20 Alloy Structural Steel Mechanical And Physical Properties

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - December 9, 2025 - 304.00 Dollar US$

  Mechanical Properties and Physical Characteristics of 805M20 Alloy Structural Steel Mechanical Properties Strength: Tensile strength ≥980 MPa, yield strength ≥785 MPa, significantly higher than ordinary carburized steel. Toughness: Elongation ≥9%, re...

• 
  Highly Fluid Chromium Carbide Powder

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 13.60 Dollar US$

  Chromium carbide powder has outstanding high-temperature oxidation resistance. Its oxidation rate is low below 900℃ in the air, and the formed oxide film can prevent further oxidation, making it suitable for use in high-temperature working conditions...




• 
  Titanium Carbide Powder For Automated Forming

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 13.60 Dollar US$

  This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K), and can be used to make conductive ceramics, heating elements, etc. After being compounded with copper...

• 
  Industrial Titanium Carbide Guide Wheels Hard Alloy

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 13.50 Dollar US$

  The hard alloy titanium carbide guide wheels exhibit a broad operating temperature range, maintaining stable performance in environments from -100°C to 600°C. These guide wheels are suitable for both low-temperature frozen pipe manufacturing and high...

• 
  Wear Resistant Titanium Carbide Hard Alloy Guide Wheel And Rollers

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 13.50 Dollar US$

  The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to 600℃. They can be used normally in both low-temperature frozen pipe production and high-temperature hot...

• 
  Titanium Carbide Hard Rods Special For Extrusion Dies

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 12.80 Dollar US$

  Hard alloy titanium carbide round rods can be tailored to achieve specific performance characteristics by adjusting the titanium carbide content (typically 70%–90%) and the binder proportion. Higher titanium carbide content enhances wear resistance, ...

• 
  High Purity Titanium Carbide Rods Have Small Dimensional Tolerances

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - December 8, 2025 - 12.80 Dollar US$

  Hard alloy titanium carbide round rods can be customized into products with different properties by adjusting the titanium carbide content (usually 70%-90%) and the proportion of binder. When the titanium carbide content is relatively high, it has st...

• 
  Dead Burnt Magnesite

  Minerals and ores and metals - Steyuan Mineral Resources Group LTD - China - December 7, 2025 - 500.00 Dollar US$

  Basic Info. Model NO.: Magnesite Classification: Metallurgical Magnesite: Production Process Sintering Process: Refractoriness (℃) 1770< Refractoriness< 2000 Shape: Granules or Powder Specification: MGO: 85%, 87%, 90%, 95% Origin: China HS Code...