sy2008 mechanical seals Photos Catalog - page 27 - ECeurope Market

• 
  En Bs 735a50 Steel Good Comprehensive Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - March 3, 2025 - 332.00 Dollar US$

  EN/BS 735A50 steel characteristics Good mechanical properties: It has good comprehensive mechanical properties, high hardenability, high fatigue strength, and high yield ratio. Grain refinement: The addition of vanadium refines the grains of steel, r...

• 
  High Hardenability 2230 Steel Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - March 3, 2025 - 323.00 Dollar US$

  2230 steel, it is a Swedish standard alloy spring steel. The specific introduction is as follows: - **Chemical composition** - **Carbon (C)**: 0.48% - 0.53% - **Manganese (Mn)**: 0.70% - 0.90% - **Phosphorus (P)**: ≤0.035% - **Sulfur (S)**: ≤0.04% - ...

• 
  Best Performance Gost 50ХФА Steel Typical Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - March 3, 2025 - 336.00 Dollar US$

  GOST 50ХФА steel is an alloy spring steel in Russian standards. Its combination of high carbon and alloying elements gives it excellent mechanical properties. After quenching and tempering, the typical mechanical properties of GOST 50ХФА steel are: T...

• 
  Factory Sales Ns 3306 Steel Sheet Mechanical Surface Treatment

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - March 17, 2025 - 997.00 Dollar US$

  NS 3306 steel sheet mechanical surface treatment Polishing Mecha nical or chemical polishing is used to make the surface smooth, reduce surface defects, and improve the corrosion resistance and aesthetics of NS 3306 steel sheet. Sandblasting Use high...

• 
  Detailed Explanation Of 55nicrmov7 Hot Working Alloy Steel Mechanical Properties

  Metal and mineral industries - Dongguan Songshun Mould Steel Co., Ltd. - China - March 31, 2025 - check with company for price

  55NiCrMoV7 hot working alloy steel (DIN 1.2714) is an alloy tool steel with excellent mechanical properties. The following are its main mechanical properties: 1. Hardness: Annealed state: maximum 248 HB (Brinell hardness) Quenched and tempered state:...

• 
  W Nr 1 7147 Alloy Pipe Excellent High Temperature Resistance And Mechanical Strength

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - April 14, 2025 - 787.00 Dollar US$

  W-Nr 1.7147 alloy tube (20MnCr5) is widely used in scenarios that need to withstand high temperatures and high mechanical loads due to its excellent high temperature resistance and mechanical strength. The following are its main characteristics and a...

• 
  In Stock Jis Scr440 Material Excellent Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - April 27, 2025 - 596.00 Dollar US$

  JIS SCr440 material is well known for its excellent mechanical properties. It not only has high strength and hardness, but also has good wear resistance and toughness. This material undergoes a rigorous heat treatment process during the manufacturing...

• 
  Scr440 Alloy Tool Steel Preferred Material For Mechanical Manufacturing

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - April 27, 2025 - 595.00 Dollar US$

  SCr440 alloy tool steel is a high-strength, high-toughness steel commonly used in the field of mechanical manufacturing. Its main components include carbon, chromium, manganese and other elements. It has good wear resistance and fatigue resistance an...




• 
  High Quality Fabrication Astm 5140 Steel Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - April 28, 2025 - 700.00 Dollar US$

  The main chemical composition of ASTM 5140 steel includes carbon (C) content of about 0.40% and manganese (Mn) content of about 0.60% - 0.90%. Carbon gives steel a certain strength and hardness, while manganese can improve the hardenability of steel,...

• 
  Superior Materials 41cr4 Steel Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - April 28, 2025 - 710.00 Dollar US$

  41Cr4 steel is an alloy structural steel, and the implementation standard is EN 10083-3. It is used in the quenched and tempered state and has high strength, toughness and hardenability. The following is a detailed introduction to its mechanical prop...

• 
  Different Tempering Temperatures Din 41cr4 Steel Changes In Mechanical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - April 28, 2025 - 690.00 Dollar US$

  Changes in mechanical properties of DIN 41Cr4 steel at different tempering temperatures Low-temperature tempering (150 - 250℃): The main purpose is to eliminate quenching stress, reduce the brittleness of steel, and maintain high hardness and wear re...

• 
  Aisi 4140 Mechanical Steel Forging Preparation Process

  Metal and mineral industries - Dongguan Songshun Mould Steel Co., Ltd. - China - May 12, 2025 - 137.00 Dollar US$

  Factors affecting fatigue resistance 1. Heat treatment process - Heat treatment has a great influence on the fatigue resistance of 4140 low alloy steel. Quenching and tempering are the key heat treatment steps. Quenching can make steel obtain high-st...

• 
  Hina Manufacturer Mechanical Seal Cooling Water Jacket 1fk5f32km 04 08 For Power Station

  Photographic services - DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD - China - May 22, 2025 - 454.00 Dollar US$

  "China Manufacturer Mechanical seal cooling water jacket 1FK5F32KM-04-08 for power station Our company is equipped with high-precision cutting-edge technology. Our products are mainly used in chemical industry, power plants, steel and other areas. Pr...

• 
  China Supply Mechanical Seal Shaft Sleeve Faid56 01 13 For Turbine Generator

  Domestic appliances - DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD - China - May 22, 2025 - 485.00 Dollar US$

  "China supply Mechanical seal shaft sleeve FAID56-01-13 for turbine generator Deyang Dongfang Yoyik is a trade production company with many international brands. Our source is authentic, product is quality guaranteed, price is reasonable, welcomed by...

• 
  Enhance Market Competitiveness Scm440h Alloy Steel Mechanical Properties

  Alloys - Dongguan Songshun Mould Steel Co., Ltd. - China - May 26, 2025 - 107.00 Dollar US$

  Mechanical properties SCM440H alloy steel has high strength. Its tensile strength is generally around 800-950MPa, and its yield strength is around 600-750MPa. This means that the material is not prone to plastic deformation and fracture when subjecte...

• 
  Qsb3 3 Diesel Mechanical Engine Assy 75kw 2200rpm For Cummins

  Heavy construction machinery - Hebei Keluo Construction Machinery Co.,Ltd. - China - June 4, 2025 - 5000.00 Dollar US$

  Hebei Keluo Construction Machinery Co., Ltd. is proud to offer a wide range of quality engines. With our extensive inventory, you can find the engines and spare parts you need, whether you are maintaining, repairing or upgrading generator sets, const...




• 
  Hot Sale Customized A30304 Steel Comprehensive Mechanical And Physical Properties

  Minerals and ores and metals - Dongguan Songshun Mould Steel Co., Ltd. - China - June 23, 2025 - 505.00 Dollar US$

  A30304 steel mechanical properties Tensile strength: ≥930 MPa Yield strength: ≥785 MPa Elongation: ≥12% Segmental shrinkage: ≥50% Impact energy: ≥63 J (some data reach ≥71 J). A30304 steel physical properties Density: 7.85 g/cm³ Coefficient of therma...

• 
  Polyphenylene Ether For The Mechanical Industry

  Resins and rosins and other resin derived materials - Syntop Chemical Co., Ltd. - China - June 23, 2025 - check with company for price

  Polyphenylene ether applications. ① used in the field of electronic and electrical appliances, such as televisions, computers, fax machines, photocopiers, the shell, the use of its excellent electrical properties and heat-resistant to play a role in ...

• 
  Mechanical Wear Resistant Alloy Round Bar

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - June 26, 2025 - 12.80 Dollar US$

  Titanium carbide carbide round bar is a composite material with steel as the base phase and refractory metal carbide such as titanium carbide as the hard phase. It is a high-hardness, high-strength titanium matrix alloy composite material commonly us...

• 
  Adapted To Precision Mechanical Transmission Guide Wheels

  Alloys - Zhuzhou Hastion High-Tech Materials Co.,Ltd. - China - June 29, 2025 - 13.50 Dollar US$

  Titanium carbide guide wheel guide roller is made of titanium carbide as the main hard phase by powder metallurgy process, with high hardness, wear resistance, impact resistance and thermal stability, etc., the appearance of the wheel or roller, comm...