Micron Grade Titanium Carbide Round Rods - China

As a key material in high-end manufacturing, tungsten carbide round bar has excellent corrosion resistance and is not easy to rust or deteriorate when used in humid, acidic and alkaline environments.

Its thermal conductivity is 15% higher than that of traditional tungsten carbide round bars, which can quickly dissipate the heat generated during the cutting process and reduce the risk of tool wear due to overheating.

The round bar has a flexural strength of up to 2, 500 MPa, combining high hardness with a certain degree of toughness, which avoids the problem of breakage due to impact during use.

In the aerospace field, they are often used to make precision machining tools for engine parts to meet the demand for high-precision machining.

Tungsten carbide titanium carbide round bar can be customised with different properties by adjusting the titanium carbide content (usually 70%-90%) and binder ratio.

When the titanium carbide content is higher, it is more wear-resistant and suitable for rough machining scenarios; an increase in the binder ratio improves toughness and is more suitable for finishing.

Its density is only 6.5g/cm³, 20% lighter than tungsten carbide rods of the same size, making it suitable for making lightweight tools.

In the 3C electronics industry, it is commonly used to process precision parts such as mobile phone middle frames and laptop shells, which can ensure that the product surface is free of scratches and small dimensional errors.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.