Low Impurity Titanium Carbide Powder - China

Titanium carbide powder has excellent oxidation resistance.

It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components.

Coating it on the surface of steam turbine blades can resist the erosion and oxidation of high-temperature gas, thereby extending the service life of the blades.

The powder has a high grinding efficiency and can be used to make abrasives.

When grinding hard alloys, its efficiency is twice that of alumina abrasives.

In the processing of optical glass, the grinding tools made of this powder can ensure the high smoothness of the glass surface.

This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K), and can be used to make conductive ceramics, heating elements, etc.

After being compounded with copper powder, the resulting composite material features both high hardness and high electrical conductivity, making it suitable for manufacturing spark electrodes, with the electrode loss rate reduced to below 0.1%.

The particle size distribution of the powder is narrow, and the ratio of D50 to D90 is less than 1.5, which can ensure the uniformity of the density of the formed green body and reduce the deformation after sintering.

In the field of electronic packaging, it can be used to prepare high thermal conductivity packaging materials to solve the heat dissipation problem of chips.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.