Titanium Carbide Hard Rods Special For Mining Equipment - China

The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1, 000 mm.

It is amenable to secondary processing techniques such as precision grinding and wire cutting, enabling the production of components with complex geometries.

Although the initial cost is higher compared to conventional cemented carbide, a comprehensive evaluation of its extended service life and enhanced processing efficiency results in a lower unit production cost.

In the gear manufacturing industry, hobs fabricated from this material can ensure gear tooth surface accuracy of grade 6 or higher, meeting the stringent requirements of high-performance mechanical transmission systems.

Titanium carbide hard alloy round bars can be tailored to exhibit different mechanical properties by adjusting the titanium carbide content (typically between 70% and 90%) and the binder ratio.

Higher titanium carbide content enhances wear resistance, making it suitable for rough machining applications, while an increased binder proportion improves toughness, rendering it ideal for precision finishing operations.

With a density of only 6.5 g/cm³—approximately 20% lighter than tungsten carbide rods of comparable dimensions—it is particularly well-suited for the manufacture of lightweight cutting tools.

In the 3C electronics industry, it is widely employed in machining high-precision components such as smartphone frames and laptop housings, ensuring scratch-free surfaces and minimal dimensional deviations

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.