High Purity Titanium Carbide Rods Specifically Designed For Mold Accessories - China

Compared with traditional high-speed steel bars, hard alloy titanium carbide round bars allow for a cutting speed that is 3 to 5 times higher, significantly reducing processing time in mass production.

These bars possess a uniform microstructure with grain size controlled below 1 μm, ensuring consistent mechanical properties throughout the material and preventing tool failure caused by material inhomogeneity.

In the mold industry, cold stamping die inserts fabricated from this material exhibit a service life 50 to 100 times greater than that of conventional steel inserts, thereby substantially reducing replacement frequency and overall production costs.

As a critical material in high-end manufacturing, hard alloy titanium carbide round bars demonstrate excellent corrosion resistance and are resistant to rust or degradation in humid, acidic, or alkaline environments.

Their thermal conductivity is 15% higher than that of traditional tungsten carbide round bars, enabling rapid dissipation of heat generated during cutting and reducing the risk of thermal-induced tool wear.

Additionally, these round bars exhibit a bending strength of up to 2500 MPa, combining high hardness with sufficient toughness to prevent fracture under impact loading conditions.

In the aerospace industry, precision machining tools made from this material are commonly used for the fabrication of engine components, meeting stringent requirements for high-precision manufacturing.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.