Chemically Stable Titanium Carbide Alloy Round Bar - China

titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard phase and cobalt or nickel as the binder phase.

Its hardness is as high as HRC85 or above, and its wear resistance far exceeds that of ordinary steel, and it can still maintain stable performance even in high temperature environments above 500℃.

This kind of round bar size precision is very high, diameter tolerance can be controlled in ± 0.01mm, very suitable for the production of precision cutting tools, mould cores and so on.

In the processing of stainless steel, titanium alloys and other difficult-to-cut materials, the life of tools made of it is 10-20 times that of high-speed steel tools, which can significantly improve productivity.

Tungsten carbide titanium carbide round bar can be customised with different properties by adjusting the titanium carbide content and binder ratio.

When the titanium carbide content is higher, it is more wear-resistant and suitable for roughing scenarios; an increase in the binder ratio improves toughness and is more suitable for finishing.

Its density is only 6.5g/cm³, 20% lighter than tungsten carbide rods of the same size, making it suitable for making lightweight tools.

In the 3C electronics industry, it is commonly used to process precision parts such as mobile phone middle frames and laptop shells, which can ensure that the product surface is free of scratches and small dimensional errors.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.