Chemically Stable Chromium Carbide Powder - China

The powder has good chemical stability, does not react with water and dilute acid at room temperature, and only dissolves slowly in concentrated nitric acid and hydrofluoric acid, making it suitable for making corrosion-resistant parts.

Mixed with nickel-based alloy powder, made of spray welding layer is both wear-resistant and corrosion-resistant, widely used in chemical equipment such as stirring shafts, reactor walls, etc., can withstand long-term erosion of acid and alkali solutions.

The fluidity of the powder is good, and the bulk density is 2.8-3.2g/cm³, which is convenient for the continuous powder supply of automatic spraying equipment to ensure the uniform thickness of the coating.

Chromium carbide powder has outstanding high-temperature antioxidant performance, with a low oxidation rate below 900°C in air, and the oxide film formed can prevent further oxidation, making it suitable for use in high-temperature working conditions.

It is suitable for use in high-temperature working conditions.

Its use in the coating of gas turbine blades can enable the blades to work normally at a high temperature of 600-800℃ and prolong the overhaul cycle.

The sintering activity of the powder is high, and after sintering with the metal bonding phase at 1100-1300°C, it can be made into a high-density cemented carbide with a flexural strength of more than 1500MPa.

In the field of high-temperature bearings, this alloy bearings can withstand high temperature and high load, and the performance is better than traditional bearing steel.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.