4 Russia 
4 USA 
2 Germany 
2 Singapore 
1 Greece 
1 Philippines 
Industrial machine tools - page 21 - ECeurope Market
-
Abb Foundation Fieldbus Linking Device Ld 800hse ExIndustrial machine tools - Anonymous - China - July 17, 2024 - 12000.00 Dollar US$The FOUNDATION Fieldbus Linking Device LD 800HSE EX is registered according to class 42c of the HSE profile, therefore providing the following functions: • Identification of devices connected to the H1 links • Configuration of connected H1 devices th...
-
Abb Hr Series Control And I OIndustrial machine tools - Anonymous - China - July 17, 2024 - 12000.00 Dollar US$Symphony Plus HR Series provides a scalable solution that spans and integrates loop, unit, area, plant and interplant controls. Its system communication architecture is based on a high-speed, high-throughput and highsecurity redundant INFI-Net contro...
-
Foxboro Fbm237 Output ModuleIndustrial machine tools - Anonymous - China - July 17, 2024 - 12000.00 Dollar US$The FBM237, 0 to 20 mA Output Interface Module contains eight channel isolated 0 to 20 mA dc analog output channels. The outputs are galvanically isolated from other channels and ground. The module can be used as a single unit, or as a redundant pair...
-
Foxboro Compact Fbm240 Output And Input ModuleIndustrial machine tools - Anonymous - China - July 17, 2024 - 17000.00 Dollar US$The Compact FBM240 is an 8 channel input and 8 channel output Foxboro™ DCS Fieldbus Module (FBM) available as a single or redundant module. A redundant pair of the modules combine to provide redundancy at the FBM level, with field I/O wired to one co...
-
Foxboro Fbm242 Output ModuleIndustrial machine tools - Anonymous - China - July 17, 2024 - 22500.00 Dollar US$The FBM242 Discrete Output Module contains 16 discrete output channels, which are sourced externally, rated up to 2 A at 60 V dc. Associated termination assemblies (TAs) provide for discrete outputs to loads of 2 A at 60 V dc, relay outputs (120 V ac...
-
Self Leveling Laser LevelIndustrial machine tools - Holo Precision Instrument Co.,ltd. - China - July 14, 2024 - 100.00 Dollar US$When choosing a self-leveling laser level, several features should be considered : Accuracy Look for levels with high accuracy ratings, typically measured in fractions of an inch over a certain distance. Range Consider the working range of the laser—...
-
Nivel De LaserIndustrial machine tools - Holo Precision Instrument Co.,ltd. - China - July 14, 2024 - 100.00 Dollar US$Multi-Line Projection: Nivel laser 12 lineas project 12 laser lines, enabling precise leveling horizontally, vertically, and diagonally. 360-Degree Coverage: Enjoy comprehensive coverage with a 360-degree projection range, ideal for large-scale proje...
-
Floor Laser LevelIndustrial machine tools - Holo Precision Instrument Co.,ltd. - China - July 14, 2024 - 100.00 Dollar US$In the realm of precision tools, a ceiling laser level stands out as an indispensable asset for anyone striving for accuracy and efficiency in construction and renovation projects. Understanding the mechanics behind a ceiling laser level is crucial t...
-
Construction Laser LevelIndustrial machine tools - Holo Precision Instrument Co.,ltd. - China - July 14, 2024 - 100.00 Dollar US$This construction laser level utilizes a laser beam to provide a horizontal reference line, which is essential for a variety of tasks on construction sites. Single measurement, continuous measurement, area measurement Alarm when the slope angle excee...
-
Builders Laser LevelIndustrial machine tools - Holo Precision Instrument Co.,ltd. - China - July 14, 2024 - 100.00 Dollar US$Single measurement, continuous measurement, area measurement Alarm when the slope angle exceeds 3 Self-leveling time:less than 5s Horizontal line and vertical lines can be switched automatically 360°rotati ng, outdoor and indoor use Can be used with ...
-
Crovit 3 Jaw 8 Inch Through Hole Power ChuckIndustrial machine tools - MAGRAB MACHINERY (TAIZHOU) CO., LTD. - China - July 2, 2024 - 399.00 Dollar US$Model: DK308 Chuck Size: 210 mm Spindle Nose No.：A2-6 (A2-5) Thru Hole Dia. : 52 mm Plunger Stroke: 16 mm Jaw Stroke Dia.: 7.4 mm Max RPM: 3600 r.p.m. Max Draw Bar Pull Force: 2440 kgf (24 kN) Max Gripping Force: 6010 kgf(59 kN) Max. Hydraulic Pressu...
-
Crovit 3 Jaw 6 Inch Through Hole Power ChuckIndustrial machine tools - MAGRAB MACHINERY (TAIZHOU) CO., LTD. - China - July 2, 2024 - 299.00 Dollar US$Model: DK306 Chuck Size: 169 mm Spindle Nose No.：A2-5 Thru Hole Dia. : 45 mm Plunger Stroke: 12 mm Jaw Stroke Dia.: 5.5 mm Max RPM: 6000 r.p.m. Max Draw Bar Pull Force: 2140 kgf (21 kN) Max Gripping Force: 5710 kgf(56 kN) Max. Hydraulic Pressure: 28 ...