Wear Resistant Chromium Carbide Powder - China

Chromium carbide powder can be compounded with other wear-resistant material powders (such as tungsten carbide and molybdenum disulfide) to form a composite coating, which features both high wear resistance and self-lubrication, with a friction coefficient as low as 0.05 - It is suitable for working conditions without lubrication or where lubrication is difficult.

On the surface of the drying cylinder of papermaking machinery, this composite coating can reduce the frictional damage to the paper, prevent the paper from sticking together, and improve production efficiency.

The particle size of the powder is uniform, with a particle size distribution deviation of less than 10%, which can ensure the uniformity of the microstructure of the coating and avoid performance defects.

This powder has good chemical stability.

At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated nitric acid and hydrofluoric acid.

It is suitable for making corrosion-resistant components.

After being mixed with nickel-based alloy powder, the formed spray welding layer is both wear-resistant and corrosion-resistant.

It is widely used in the stirring shafts of chemical equipment, the inner walls of reaction vessels and other parts, and can withstand the long-term erosion of acid and alkali solutions.

The powder has good fluidity, with a bulk density of 2.8-3.2g/cm³, which is convenient for continuous powder supply by automated spraying equipment and ensures uniform coating thickness.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.