Ultrafine Grained Titanium Carbide Round Rods - China

The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding.

When processing sticky materials such as aluminum alloy and copper alloy, the phenomenon of "tool sticking" is less likely to occur, ensuring a smooth processing surface.

Its surface can be further enhanced in terms of wear resistance and oxidation resistance through coating treatment (such as TiAlN coating), increasing the tool life by more than 50%.

In the field of medical devices, it is often used to make orthopedic surgical instruments, which not only ensure sharpness but also can withstand high-temperature disinfection without deformation.

Hard alloy titanium carbide round rods can be customized into products with different properties by adjusting the titanium carbide content (usually 70%-90%) and the proportion of binder.

When the titanium carbide content is relatively high, it has stronger wear resistance and is suitable for rough processing scenarios.

An increase in the proportion of the binder enhances the toughness and makes it more suitable for fine processing.

Its density is only 6.5g/cm³, which is 20% lighter than tungsten carbide rods of the same size, making it suitable for making lightweight tools.

In the 3C electronics industry, it is often used to process precision parts such as mobile phone frames and laptop shells, ensuring that the product surface is free of scratches and has small dimensional errors.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.