Titanium Carbide Rods In Stock Can Be Cut As Needed - China

Compared with traditional high-speed steel bars, the cutting speed achievable with titanium carbide hard alloy round bars can be increased by 3 to 5 times, significantly reducing processing time in mass production.

These bars exhibit a uniform microstructure with grain size controlled below 1 μm, ensuring consistent mechanical properties throughout the material and preventing tool failure caused by material inhomogeneity.

In the mold industry, cold stamping die inserts fabricated from titanium carbide hard alloy demonstrate a service life that is 50 to 100 times greater than that of conventional steel inserts, thereby substantially reducing replacement frequency and associated production costs.

Additionally, titanium carbide round bars exhibit excellent anti-adhesion properties.

When machining sticky materials such as aluminum and copper alloys, the likelihood of "built-up edge" formation is significantly reduced, resulting in improved surface finish.

The wear resistance and oxidation resistance of these bars can be further enhanced through surface coating technologies, such as TiAlN coating, extending tool life by more than 50%.

In the medical device industry, titanium carbide hard alloy is commonly used in the manufacture of orthopedic surgical instruments, offering both superior sharpness and the ability to withstand high-temperature sterilization without deformation.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.