Titanium Carbide Rods Customized Drawing Processing - China

The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm, and it is amenable to secondary processing techniques such as precision grinding and wire cutting, enabling the production of components with complex geometries.

Although its initial cost is higher than that of conventional cemented carbide, a comprehensive evaluation of service life and processing efficiency reveals a lower unit production cost.

In gear manufacturing, hobs fabricated from this material ensure gear tooth surface accuracy of grade 6 or higher, satisfying the stringent demands of high-performance mechanical transmission systems.

As a critical material in advanced manufacturing, titanium carbide-based hard alloy round bars exhibit excellent corrosion resistance, demonstrating minimal susceptibility to rust or degradation in humid, acidic, or alkaline environments.

With a thermal conductivity approximately 15% higher than that of traditional tungsten carbide round bars, it facilitates more efficient dissipation of heat generated during machining, thereby reducing the risk of thermal-induced tool wear.

The material achieves a bending strength of up to 2500 MPa, combining high hardness with adequate toughness to resist fracture under impact loading.

In the aerospace industry, precision cutting tools made from this round bar are widely employed in the manufacture of engine components, meeting rigorous requirements for high-precision machining.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.