Titanium Carbide Rod Precision Instrument Accessories - China

Titanium carbide round rods made of cemented carbide are high-performance materials fabricated through powder metallurgy processes.

These rods primarily consist of titanium carbide as the hard phase and cobalt or nickel as the binder phase.

With a hardness exceeding HRC85, their wear resistance significantly surpasses that of conventional steel.

Moreover, they maintain stable mechanical properties even under high-temperature conditions above 500°C.

These round rods exhibit exceptional dimensional accuracy, with diameter tolerances controlled within ±0.01 mm and surface roughness as low as Ra 0.02 μm.

They are particularly suitable for the manufacture of precision cutting tools and mold cores.

When used to machine difficult-to-cut materials such as stainless steel and titanium alloys, tools made from these rods demonstrate a service life 10 to 20 times longer than that of high-speed steel tools, thereby substantially improving production efficiency.

Additionally, titanium carbide round rods exhibit excellent anti-adhesion properties.

When machining sticky materials such as aluminum and copper alloys, the likelihood of "built-up edge" formation is significantly reduced, ensuring a smooth surface finish.

Their performance can be further enhanced through surface coating treatments, such as TiAlN coatings, which improve wear and oxidation resistance, extending tool life by more than 50%.

In the medical device industry, these rods are commonly used to fabricate orthopedic surgical instruments, which not only maintain sharpness but also withstand high-temperature sterilization without deformation.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.