Titanium Carbide Powder With Hardness Increased To Hrc90 - China

Titanium carbide powder has high sintering activity and can be sintered densely at 1300-1500℃, which is 200-300℃ lower than the sintering temperature of alumina ceramics, thus saving energy costs.

Compared with other ceramic powders (such as silicon carbide), it has better toughness, with a fracture toughness of up to 6MPa·m¹/², making it suitable for manufacturing structural ceramic parts.

The powder can be made into granular form through spray drying, which is convenient for forming and processing.

The density of the compact can reach more than 65% of the theoretical density.

In the field of wear-resistant valves, ceramic valves made from this powder can withstand the erosion of high-pressure fluids and have a service life 20 times that of steel valves.

The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements of different forming processes.

Spherical powder has good fluidity and is suitable for laser 3D printing.

The density of the printed parts can reach 99.8%, and its mechanical properties are comparable to those of traditional sintered parts.

The bulk density of powder can be adjusted by particle size.

Fine powder has a low bulk density and is suitable for pressing complex-shaped parts.

Coarse powder has a high bulk density and is suitable for forming large-sized green bodies.

In the field of personalized medical implants, 3D-printed titanium carbide parts are well compatible with human bones, and they are of high strength and light weight.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.