Titanium Carbide Powder Resistant To High Temperature Oxidation At 800℃ - China

The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements of different forming processes.

Spherical powder has good fluidity and is suitable for laser 3D printing.

The density of the printed parts can reach 99.8%, and its mechanical properties are comparable to those of traditional sintered parts.

The bulk density of powder can be adjusted by particle size.

Fine powder has a low bulk density and is suitable for pressing complex-shaped parts.

Coarse powder has a high bulk density and is suitable for forming large-sized green bodies.

In the field of personalized medical implants, 3D-printed titanium carbide parts are well compatible with human bones, and they are of high strength and light weight.

Titanium carbide powder has excellent oxidation resistance.

It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is only 0.01mg/(cm²·h), making it suitable for manufacturing high-temperature wear-resistant components.

Coating it on the surface of steam turbine blades can resist the erosion and oxidation of high-temperature gas, thereby extending the service life of the blades.

The powder has a high grinding efficiency and can be used to make abrasives.

When grinding hard alloys, its efficiency is twice that of alumina abrasives.

In the processing of optical glass, the grinding tools made of this powder can ensure the high smoothness of the glass surface.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.