Titanium Carbide Hard Guide Wheels For Transmission - China

The guide wheel features precisely machined installation holes, enabling tight control of the fit clearance with the shaft within 0.005–0.01 mm.

This ensures smooth rotation without oscillation, thereby enhancing guiding accuracy.

The design offers low maintenance requirements and does not necessitate frequent lubrication; routine cleaning of surface contaminants is sufficient, making it well suited for continuous operation in automated production lines.

In metal wire mesh manufacturing, guide wheels help maintain uniform mesh aperture size, keeping dimensional deviations within ±5%, thus meeting the stringent quality standards required for filter materials.

These guide wheels can be customized with various groove profiles—such as V-shaped, U-shaped, or semi-circular—based on the specific dimensions and types of wires or tubes, allowing flexibility to meet diverse production needs.

Following surface polishing, the wheel achieves a surface roughness as low as Ra 0.01 μm, significantly reducing friction-induced wire damage and increasing the tensile strength of the metal wire by approximately 10%.

In automotive brake cable production, the consistent guidance provided by these wheels ensures uniform cable tensioning, minimizing the risk of in-service failure due to breakage.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.