Titanium Carbide Hard Alloy Round Bars That Can Be Delivered Quickly - China

Hard alloy titanium carbide round rods can be customized into products with different properties by adjusting the titanium carbide content (usually 70%-90%) and the proportion of binder.

When the titanium carbide content is relatively high, it has stronger wear resistance and is suitable for rough processing scenarios.

An increase in the proportion of the binder enhances the toughness and makes it more suitable for fine processing.

Its density is only 6.5g/cm³, which is 20% lighter than tungsten carbide rods of the same size, making it suitable for making lightweight tools.

In the 3C electronics industry, it is often used to process precision parts such as mobile phone frames and laptop shells, ensuring that the product surface is free of scratches and has small dimensional errors.

As a key material in the high-end manufacturing field, hard alloy titanium carbide round rods have excellent corrosion resistance and are not prone to rust or deterioration when used in damp, acidic or alkaline environments.

Its thermal conductivity is 15% higher than that of traditional tungsten carbide round rods, which can quickly dissipate the heat generated during the cutting process and reduce the risk of tool wear due to overheating.

The bending strength of the round bar can reach 2500MPa, featuring both high hardness and certain toughness, thus avoiding the problem of breakage due to impact during use.

In the aerospace field, precision machining tools are often used to make engine components, meeting the requirements of high-precision machining

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.