Titanium Carbide Hard Alloy Rods For Hardware Tool Materials - China

Compared with traditional high-speed steel bars, hard alloy titanium carbide round bars allow for a cutting speed that is 3 to 5 times higher, significantly reducing processing time in mass production.

These bars feature a uniform microstructure with grain sizes controllable below 1 μm, ensuring consistent mechanical properties throughout the material and preventing tool failure caused by material inhomogeneity.

In the mold industry, cold stamping die inserts made from this material exhibit a service life 50 to 100 times longer than that of conventional steel inserts, thereby substantially reducing replacement frequency and overall production costs.

The properties of hard alloy titanium carbide round rods can be tailored by adjusting the titanium carbide content (typically ranging from 70% to 90%) and the binder proportion.

A higher titanium carbide content enhances wear resistance, making the material suitable for rough machining applications, whereas an increased binder proportion improves toughness, rendering it more appropriate for precision machining.

With a density of only 6.5 g/cm³, these rods are approximately 20% lighter than tungsten carbide rods of the same dimensions, making them ideal for the production of lightweight tools.

In the 3C electronics industry, they are widely used for machining precision components such as mobile phone frames and laptop casings, ensuring scratch-free surfaces and minimal dimensional tolerances.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.