Titanium Carbide Hard Alloy For Industrial Guide Wheels - China

This type of guide wheel has extremely strong corrosion resistance.

It can be used for more than five years without rusting in a humid environment containing chloride ions (such as a factory by the sea), while traditional steel guide wheels can only be used for three months.

Its internal structure is dense, with a porosity of less than 0.1%, which can effectively prevent coolant from seeping into the interior and causing cracking.

During the copper tube drawing process, the friction coefficient between the guide wheel and the copper tube is as low as 0.08, which can reduce surface scratches on the copper tube and increase the finished product qualification rate from 85% to 99%.

The dynamic balance accuracy of the guide wheel reaches G0.4 grade.

When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop.

It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface.

In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.