Titanium Carbide Hard Alloy Drive Wheel Accessory - China

This guide wheel is customizable with various groove geometries—including V-shaped, U-shaped, and semi-circular profiles—tailored to the dimensional and mechanical specifications of wire or tubular materials, thereby accommodating diverse production requirements.

Following precision surface polishing, the wheel achieves a surface roughness of Ra 0.01 μm, significantly minimizing friction-induced surface damage to wires and enhancing the tensile strength of metallic wires by up to 10%.

In automotive brake line manufacturing, the wheel’s high-precision guidance ensures consistent tension control throughout the drawing process, mitigating risks of in-service failure due to localized stress concentration or premature fracture.

Dynamic balance is certified to ISO 1940–1 Grade G0.4, with vibration amplitude remaining below 0.01 mm even at elevated rotational speeds—effectively suppressing equipment vibration and associated acoustic noise, thereby improving occupational safety and workshop environmental conditions.

Chemically inert under standard operating conditions, the wheel material exhibits no adverse reactivity with common metal wire substrates, eliminating risks of surface contamination, discoloration, or interfacial degradation.

Particularly in precious metal wire processing (e.g., gold and silver wires), its ultra-clean, non-adhesive surface prevents particulate shedding and material loss, contributing directly to yield improvement and cost reduction.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.