Specially Designed For 3d Printing Chromium Carbide Powder - China

This powder has good chemical stability.

At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated nitric acid and hydrofluoric acid.

It is suitable for making corrosion-resistant components.

After being mixed with nickel-based alloy powder, the formed spray welding layer is both wear-resistant and corrosion-resistant.

It is widely used in the stirring shafts of chemical equipment, the inner walls of reaction vessels and other parts, and can withstand the long-term erosion of acid and alkali solutions.

The powder has good fluidity, with a bulk density of 2.8-3.2g/cm³, which is convenient for continuous powder supply by automated spraying equipment and ensures uniform coating thickness.

Chromium carbide powder has outstanding high-temperature oxidation resistance.

Its oxidation rate is low below 900℃ in the air, and the formed oxide film can prevent further oxidation, making it suitable for use in high-temperature working conditions.

When applied to the coating of gas turbine blades, it enables the blades to operate normally at high temperatures of 600-800℃ and extends the maintenance cycle.

The sintering activity of the powder is high.

After sintering with the metal binder phase at 1100-1300℃, high-density cemented carbide can be made, with a flexural strength of over 1500MPa.

In the field of high-temperature bearings, this alloy bearing can withstand high temperatures and high loads, and its performance is superior to that of traditional bearing steel.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.