Multi Purpose Titanium Carbide Round Rods - China

titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard phase and cobalt or nickel as the binder phase.

Its hardness is as high as HRC85 or above, and its wear resistance far exceeds that of ordinary steel, and it can still maintain stable performance even in high temperature environments above 500℃.

This round bar size precision is very high, diameter tolerance can be controlled in ± 0.01mm, surface roughness as low as Ra0.02μm, very suitable for the production of precision cutting tools, mould cores and so on.

In the processing of stainless steel, titanium alloys and other difficult-to-cut materials, the life of the tools made of it is 10-20 times that of high-speed steel tools, which can significantly improve productivity.

As a key material in the field of high-end manufacturing, cemented carbide titanium carbide round bar has excellent corrosion resistance, and it is not easy to rust or deteriorate when used in humid, acidic and alkaline environments.

Its thermal conductivity is 15% higher than that of traditional tungsten carbide round bars, which can quickly dissipate the heat generated during the cutting process and reduce the risk of tool wear due to overheating.

The round bar has a flexural strength of up to 2, 500 MPa, combining high hardness with a certain degree of toughness, which avoids the problem of breakage due to impact during use.

In the aerospace industry, they are often used to make precision machining tools for engine parts to meet the demand for high-precision machining.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.