Micron Sized Titanium Carbide Tic Powder Uniform Particle Size - China

Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite powders and customize materials with different properties.

For instance, after adding 10% tungsten carbide powder, the flexural strength of the sintered body can be increased by 15%, making it suitable for manufacturing parts that bear impact loads.

There are various methods for preparing powders, including carbothermal reduction and vapor deposition.

Among them, the powder produced by carbothermal reduction has a relatively low cost and is suitable for large-scale application.

In the mold industry, molds made of multi-component composite powders are not only wear-resistant but also impact-resistant, and have a wider range of applications.

The powder has low toxicity and complies with environmental protection standards such as RoHS, making it suitable for use in fields with high safety requirements such as medical devices and the food industry.

It has good compatibility with biological tissues.

The bone repair materials made from it can promote the growth of bone cells and accelerate wound healing.

The powder has good storage stability.

When stored in a sealed container, its shelf life can reach more than 5 years without caking or deteriorating.

In the field of dentistry, it can be used to make dental implants, which are both wear-resistant and aesthetically pleasing, with a service life of over 10 years.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.