Low Carbon And Environmentally Friendly Titanium Carbide Hard Alloy Rods - China

The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise regulation of sintering temperature (about 1500℃), every step affects the final performance.

The finished product features excellent dimensional stability.

Under temperature variations ranging from -50℃ to 300℃, its coefficient of thermal expansion is only 6×10⁻⁶/℃, which is significantly lower than that of metal materials, ensuring the precision of precision tools in various environments.

It is widely used as wear-resistant inserts in automotive molds, capable of withstanding long-term high-pressure friction without easy wear, thus extending the service life of the molds.

As a key material in the high-end manufacturing field, titanium carbide round rods have excellent corrosion resistance and are not prone to rust or deterioration when used in damp, acidic or alkaline environments.

Its thermal conductivity is 15% higher than that of traditional tungsten carbide round rods, which can quickly dissipate the heat generated during the cutting process and reduce the risk of tool wear due to overheating.

The bending strength of the round bar can reach 2500MPa, featuring both high hardness and certain toughness, thus avoiding the problem of breakage due to impact during use.

In the aerospace field, precision machining tools are often used to make engine components, meeting the requirements of high-precision machining

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.