Hard Alloy Titanium Carbide Guide Wheel Transmission - China

Titanium carbide hard alloy guide wheels are key guiding components in the production of wire and tube materials.

They are made by sintering high-purity titanium carbide and cobalt binder through powder metallurgy.

The surface hardness can reach up to HRC88, and the wear resistance is over 50 times that of steel guide wheels.

The roundness error is controlled within 0.002mm, ensuring smooth operation of the wire during high-speed drawing (up to 100m/s) and preventing jitter or deviation.

In the production of stainless steel wire, using this type of guide wheel can reduce the surface roughness of the wire from Ra1.6μm to Ra0.4μm, significantly improving product quality.

Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement.

Its service life is 2 to 3 times that of ceramic guide wheels.

In the production of steel cord, one set of guide wheels can produce over 1, 000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons.

The cost-performance advantage of the guide wheels makes them widely used in the tire industry, contributing to enhancing the wear resistance and safety of tires.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.