Fine Grain Size Uniformly Distributed Titanium Carbide Rods - China

As a key material in the high-end manufacturing sector, titanium carbide carbide round bars exhibit excellent corrosion resistance, remaining rust-free and stable even in humid or acidic/alkaline environments.

Their thermal conductivity is 15% higher than that of traditional tungsten carbide round bars, enabling rapid dissipation of heat generated during machining and reducing the risk of tool wear caused by overheating.

The round bar has a bending strength of up to 2500 MPa, combining high hardness with sufficient toughness to prevent breakage due to impact during use.

In the aerospace industry, it is commonly used to manufacture precision machining tools for engine components, meeting the demands of high-precision processing.

Hardmetal titanium carbide round bars can be customized to different performance specifications by adjusting the titanium carbide content (typically 70%-90%) and binder ratio.

When the titanium carbide content is higher, the wear resistance is stronger, making it suitable for rough machining scenarios; increasing the binder ratio enhances toughness, making it more suitable for precision machining.

Its density is only 6.5 g/cm³, making it 20% lighter than tungsten carbide rods of the same size, making it suitable for lightweight tools.

In the 3C electronics industry, it is commonly used to process precision parts such as smartphone frames and laptop casings, ensuring a scratch-free surface and minimal dimensional errors.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.