Corrosion Resistant Titanium Carbide Rods For Chemical Equipment - China

Compared with traditional high-speed steel bars, hard alloy titanium carbide round bars allow for a cutting speed that is 3 to 5 times higher, significantly reducing processing time in mass production.

These bars exhibit a uniform microstructure with grain sizes controllable below 1 μm, ensuring consistent mechanical properties throughout the material and preventing tool failure caused by inhomogeneity.

In the mold industry, cold stamping die inserts fabricated from this material demonstrate a service life that is 50 to 100 times greater than that of conventional steel inserts, thereby substantially decreasing replacement frequency and lowering overall production costs.

The manufacturing process of these round bars is highly stringent, ranging from the purity control of titanium carbide powder (purity ≥ 99.5%) to the precise regulation of sintering temperature (approximately 1500 °C), with each step critically influencing the final performance.

The resulting product possesses excellent dimensional stability, with a thermal expansion coefficient of only 6×10⁻⁶/℃ across temperature variations from -50 °C to 300 °C—markedly lower than that of most metallic materials—ensuring dimensional accuracy of precision tools under diverse environmental conditions.

This material is widely employed as wear-resistant inserts in automotive molds, capable of enduring prolonged high-pressure friction with minimal wear, thus significantly extending the service life of the molds.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.