Chromium Carbide Powder Suitable For The Protection Of Metallurgical And Petrochemical Equipment - China

Chromium carbide powder can be compounded with other wear-resistant material powders (such as tungsten carbide and molybdenum disulfide) to form a composite coating, which features both high wear resistance and self-lubrication, with a friction coefficient as low as 0.05 - It is suitable for working conditions without lubrication or where lubrication is difficult.

On the surface of the drying cylinder of papermaking machinery, this composite coating can reduce the frictional damage to the paper, prevent the paper from sticking together, and improve production efficiency.

The particle size of the powder is uniform, with a particle size distribution deviation of less than 10%, which can ensure the uniformity of the microstructure of the coating and avoid performance defects.

Chromium carbide powder has outstanding high-temperature oxidation resistance.

Its oxidation rate is low below 900℃ in the air, and the formed oxide film can prevent further oxidation, making it suitable for use in high-temperature working conditions.

When applied to the coating of gas turbine blades, it enables the blades to operate normally at high temperatures of 600-800℃ and extends the maintenance cycle.

The sintering activity of the powder is high.

After sintering with the metal binder phase at 1100-1300℃, high-density cemented carbide can be made, with a flexural strength of over 1500MPa.

In the field of high-temperature bearings, this alloy bearing can withstand high temperatures and high loads, and its performance is superior to that of traditional bearing steel.

Company Contact:

• Posted By: Zhuzhou Hastion High-Tech Materials Co.,Ltd.

• Phone: +86-731-22891182

• Address: Small And Medium-Sized Enterprises Pioneer Park, Yanling County, Zhuzhou City,Hunan Province, China, Zhuzhou , Hunan , China

• Email:

• Website: https://www.hastion.com/

• Business Description: Our factory is in yanling, Zhuzhou of Carbide centralized place,which occupies an area of 60,000 square meters and a planned factory area of 50,000 square meters.
  
  Now HASTION have 2 different
  
  productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/Z rC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
  
  the titanium carbide cermet rod/insert/plate/customiz ed shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now our products have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.