Turbocharger Parts - China

The vacuum investment casting foundry of ANYE has experiences to produce turbine, turbine wheel or impeller of turbocharger used in automobile engine.

Strictly according ISO and TS16949 certificate, the high quality of our turbocharger parts can be guaranteed.

The OD of turbine impeller can be from 50 to 500mm and the material is nickel-based superalloy.

In addition, the relative aluminum turbine can be made by low pressure process.

The nozzle ring, diffuser, turbine housing and compressor housing can be made by our close cooperative factories.

A turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work.

A turbine is a turbo machine with at least one moving part called a rotor assembly, which is a shaft or drum with blades attached.

Moving fluid acts on the turbine blade so that they move and impart rotational energy to the rotor.

Early turbine examples are windmills and waterwheels.

Gas, steam, and water turbines have a casing around the blades that contains and controls the working fluid.

Company Contact:

• Posted By: Qinhuangdao AnYe metal Industry Co., Ltd.

• Phone: 03517025398

• Address: No.4, QiantangJiang Road, Qinhuangdao City, Qinhuangdao , Hebei , China

• Email:

• Website: http://www.investment-casting.net

• Business Description: Qinhuangdao AnYe metal Industry Co., Ltd. , founded in 1996 and covering an area of 10, 000 square meters, is located in the beautiful coastal city of Qinhuangdao, Hebei Province, China.
  
  There are 400 employees, in which 20 engineers and 30 QC people.
  
  We have three lost wax casting foundries and two CNC machining workshops.
  
  The first investment casting foundry uses silica sol process to mainly produce stainless steel investment casting and aluminum investment castings; the second one uses sodium silicate process to mainly produce carbon steel and alloy steel investment castings; the third one is used to make vacuum investment castings through vacuum furnace.
  
  There are hundreds of CNC machining equipments in our two CNC machining workshops.
  
  Besides investment castings, we can also provide finished parts after machining according to clients requirements.
  
  
  
  Besides investment castings, we also have aluminum casting foundries which can do the aluminum permanent mold castings and aluminum die castings.
  
  The reason is that A356.2 aluminum alloy ingot is our main products and its annual output is 12, 000 tons.
  
  Those aluminum alloy ingot is mainly supplied to CiTiC Dicastal Wheel Manufacturing Co., Ltd, which is the largest domestic automobile aluminum hub manufacturer.
  
  Our main products are the following: auto parts( auto pipe fittings, shift fork and so on), valve and pump parts, pipe fittings, clamps, turbine wheel and impeller, and so on.
  
  They are widely used in mining, metallurgy, shipbuilding, machinery, automobile manufacturing, aerospace, petroleum and chemical industry etc.
  
  Our company has been through ISO9001: 2000 quality management system, ISO14001: 2004 environmental management system certification and TS16949 certification.
  
  We can provide high quality investment castings and aluminum parts with competitive price.
  
  We sincerely welcome clients all over the world to come to cooperate with us.
  
  We are sure that you will find we are reliable supplier.