Devcon Stainless Steel Putty - India

Devcon Stainless Steel Putty

Product Code - ST

Devcon Stainless Steel Putty is A stainless steel-filled epoxy for rebuilding and repairing stainless steel equipment.

Repairs cracks, dents, and breaks in stainless steel machinery or castings; rebuilds dairy equipment; Repairs stainless steel holding tanks.

Acceptable for use in meat and poultry plants.

Machinable to metalic finish.

NSF Approved (Certified to ANSI/NSF61).

Resistant to chemicals, most acids, bases, solvents, and alkalis.

Not recommended for long term exposure to concentrated acids or to organic solvents.

Devcon Stainless Steel Putty Compliances: Acceptable for use in meat and poultry plants.

Certified for potable water application, NSF Approved (ANSI/NSF61), 1/94

Technical data should be considered representative or typical only and lshould not be used for specification purposes.

Adhesive Tensile Shear - 2, 385 psi

Coefficient Degrees Farenheight Thermal Expansion - 34 [(in.

) / (in).

x °F ) ] x 10(-6)

Color Dark Grey

Compresive Strength - 8, 400 psi

Coverage/lb- 50 sq.

in.

/lb.

@ 1/4"

Cure Time - 16 hrs

Cured Hardness -85D

Cured Shrinkage - 0.0010 in.

/in.

Dielectric Constant - 75

Dielectric Strength - 30 volts/mil

Flexural Strength - 5, 280 psi

Mix Ratio by Volume - 3.75: 1

Mix Ratio by Weight - 11: 1

Mixed Viscosity - Putty

Modulus of Elasticity - 8.0 psi x 10(5) in.

Pot Life @ 75F - 58 min.

Recoat Time - 2-4 hrs

Solids by Volume - 100

Specific Gravity - 2.5 gm/cc

Specific Volume - 12.4 in.

(3)/lb.

Temperature Resistance - Wet: 120 Degrees ° F; Dry: 250 Degrees ° F

Thermal Conductivity - 1.23 [(cal x cm)/(sec x cm(2)

TESTS CONDUCTED ON DEVCON STAINLESS STEEL PUTTY

Devcon Stainless Steel Putty Compressive Strength is ASTM D 695

Cured Hardness if Devcon Stainless Steel Putty is Shore D ASTM D 2240

Dielectric Constant of Devcon Stainless Steel Putty is ASTM D 150

Modulus of Elasticity of Devcon Stainless Steel Putty is ASTM D 638

Adhesive Tensile Shear of Devcon Stainless Steel Putty is ASTM D 1002

Cure Shrinkage of Devcon Stainless Steel Putty isASTM D 2566

Dielectric Strength of Devcon Stainless Steel Putty in, volts/mil ASTM D 149

Coef.

of Thermal Expansion of Devcon Stainless Steel Putty is ASTM D 696

Flexural Strength of Devcon Stainless Steel Putty is ASTM D 790

Thermal Conductivity of Devcon Stainless Steel Putty is ASTM C 177

Devcon Titanium Putty, Devcon Plastic Steel Putty, Devcon Epoxy Putty, Plastic Steel Putty, Devcon Epoxy, Maintenance repair and Overhaul, INDUSTRIAL EPOXY PUTTIES, 180 Degrees Centigrade, ON LINE LEAK ARRESTOR, DEVCON, EPOXY PUTTY, BRUSHABLE CERAMIC, TITANIUM PUTTY, STEEL PUTTY, HIGH TEMPERATURE, RESISTANT, PUTTY, BELZONA 1111, BELZONA BRUSHABLE CERAMIC, BELOZONA EPOXY PUTTY, WURTH SILICON SPRAY, Instant Adhesive, Anti Corrosive Coating, Metal Repair Putties, Cold welding Compound, Bronze Putty, Wet Surface Putty, Abrasion Resistant Putty, Under water Putty, Devcon Plastic Steel Putty, Devcon 5 Minutes Epoxy Putty, Devcon 5 Minute Epoxy Putty, Devcon Stainless Steel Putty, Devcon Metal Magic Bond, Devcon Aluminum Putty, Machinable Putty, Easily Drilled Putty, Online Leak Arrestor.

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.