Cheap 1 2 3 5 7 10 14 15 20gallon Nursery Pots Wholesale - China

Therefore, when the seed germination rate is low and the planting density is large, the seeding amount should be appropriately increased, and the opposite is reduced.

Generally, 3-4 kilograms of seed are planted per mu.

In general, the sowing depth of corn is preferably 3 to 4cm.

When the soil moisture is poor, the sowing depth can be appropriately increased.

The water-seeding and sprinkler irrigation plots should be appropriately shallow sowed.

The soil texture is loose and the sandy soil is easy to dry.

Some 4 to 5 cm; avoid too deep seeding to affect the quality of emergence.

This may be how it looks, now let's talk about its growth conditions.

First of all, in our traditional Chinese tradition, there is a saying that Yin and Yang gossip, and Jiulixiang is a positive thing, so it is not suitable for those places where backlight is always used.

It needs plenty of sunlight, and the temperature is preferably between 20 and 32 - If it is too cold in winter and it is a few degrees or even zero outside, you can move the potted plant to the house for heating, otherwise it may freeze to death.

In addition to fertilizers, the leaves of jiulixiang will fall off.

After the beginning of May, we were able to move Jiulixiang to a sunny place, but strong sunlight will enhance the transpiration of the leaves, so we will increase the amount or frequency of watering after Jiulixiang moves.

Watering takes one to two days at a time, every ten days.

Whether it is watering or fertilizing, it should be carried out at night.

The amount of watering can be judged based on the dryness of the scented plant.

But no matter what container you choose, make sure there are drainage holes at the bottom.

Seeds need to be germinated depending on the situation.

Tomatoes, peppers, eggplants, cucumbers and other fruit and vegetable seeds germinate slowly and can be promoted.

Seeds must be soaked before germination, but the soaking time should not be too long.

According to the test, it takes more than 1 to 2 hours for cucumber and 3 to 4 hours for pepper, eggplant, and tomato to soak seeds (including the time for soaking seeds during disinfection).

The cold winter is slightly slow, and you need to ensure sufficient light, but you should pay attention to shade in summer.

Rosemary is more resistant to drought and can be dried and watered.

It should be watered less in winter and pay attention to frost.

In summer, it is usually poured one day.

Watering is usually watered during high temperatures, but you ca n’t water it at noon and afternoon, because it was hot at that time, the watering plants are like cooking in a pot! So when it ’s hot, water it sooner or later.

Let's water it! Every summer, there will be a rainy season before the summer.

During the rainy season, we will take the meat from the outdoor into the room.

After the rainy season passes, it will eventually clear up and take out the sun.

At that time, there may be sunburn.

.

Therefore, what we should do in summer is to avoid succulents in direct sunlight, there is a long time ago saying that do not bask in the sun after 10: 00 am to 4: 00 pm, it only takes a few hours a day.

The cormorant only needs to be kept at 25 cm, this size flower pot can better water us.

Watering rosemary is also a technical activity.

When the weather is hot in summer, we should increase the number of watering rosemary twice a day, and we cannot choose the watering time at noon.

When appropriate, water rosemary in the morning or afternoon.

But in other seasons, the watering of rosemary can be reduced, just watering once a week.

Company Contact:

• Posted By: Wilson Garden Co.,Ltd

• Phone: 8615838107808

• Address: Southwest 1st Street, Zhengzhou , Henan , China

• Email:

• Website: https://www.wilsongardenpots.com/

• Business Description: We are a professional Plastic Gallon Pots, Plastic Injection Gallon Planters, Plastic Grow Pots and Carry Trays, Plastic Propagation Tray, Plastic Flat Trays, Plastic Decorative Containers, Plastic Nutrition Pots manufacturer and supplier in China, having more than 19 years manufacturing experience, 35,000m2 workshop area, serving more than 3,000 customers worldwide.
  
  Our Mission is to provide high quality, factory price products to you! We pride ourselves on providing a quick and efficient production turnaround for our clients, no matter the size of the order.
  
  Welcome to contact us for free samples! We will reply within 24 hours!