Oil Water Separator Vapor Removal Filter - China

1 - The product definition

Compressed air precision filter is to remove the pollutants in the compressed air system, such as corrosion solid particles such as dust, scrap iron and fouling, the compressor lubricant, condensation water and acid cold condensate oil and hydrocarbon steam fog, etc., for the air compressor system to provide the high quality of compressed air meets the application requirements.

Main composition: filter, filter shell, end cover, teeth, etc.

;

Filter material selection and the general connection of process piping material is the same, for different service conditions can consider to choose cast iron, carbon steel, low alloy steel or stainless steel filter.

2 - The product features

1, high efficiency to remove water, oil mist, solid particles, 100% removal of 0.01 microns or more particles, oil mist concentration control in the 0.01 PPM/wt; 2, reasonable structure, small volume, light weight; 3, with cover plastic shell and aluminum alloy shell can choose.

4, section purification treatment, long service life

Compressed air precision filter in order to achieve high precision quality, used the filter layers of different materials, which contains boron silicate fiber, glass fiber layer, layer of activated carbon fiber, multi-layer nonwoven fabric layer and stainless steel wire mesh.

The only way to achieve no oil, no impurity of high quality air.

3 - The filter selection principles

1, import and export size: in principle, the import and export of the filter size should not be less than the import of matching pump size, generally consistent with imported pipe diameter.

2, working pressure, determined in accordance with the highest pressure filter line possible filter pressure rating.

3, level of filtering: main consideration to intercept impurities particle size, according to the medium flow process requirement.

All kinds of wire mesh can intercept the particle size of the check table below "mesh specifications".

4, air capacity: according to the working pressure is 0.7 to 1.0 Mpa large air capacity.

5, filter material: filter material selection and the general connection of process piping material is the same, for different service conditions can consider to choose cast iron, carbon steel, low alloy steel or stainless steel filter.

4 - Precision filter cores fine points

C at passing filter can remove a large amount of liquid and 3 microns above solid particles, only 5 PPM, meet minimum residual oil content with a small amount of moisture, dust and oil mist.

Used for air compressor, the back of the cooler, after before other filters, for general protection;Pretreatment device used in person before.

T air line filter Can filter out as small as 1 mu m liquid and solid particles, minimum residual oil content reached 0.5 PPM, trace moisture, dust and oil mist.

For class A filter used for pretreatment before;Person and blot machine, to further improve air quality.

A super-efficient oil removal filter can filter the liquid and solid particles as small as 0.01 microns, minimum residual oil content reached 0.001 PPM, almost all the moisture, dust and oil has been removed.

Used for filtering and blot machine before class H protection, after the person, make sure no oil in the air.

H activated carbon filter can filter out as small as 0.01 microns of oil mist and hydrocarbons, minimum residual oil content reached 0.003 PPM, contains no moisture, dust and oil, odourless tasteless.

A final filtration effect for some must use high quality high quality air units, such as the food industry, breathing, aseptic packaging, etc.

Company Contact:

• Posted By: NLD INDUSTRIES INC.

• Phone: +86-18835129450

• Address: East portal,The west two lane,South road of Bingzhou,Xiaodian District,, Taiyuan , Shanxi , China

• Email:

• Website: http://www.n-leader.com

• Business Description: Welcome to NLD Industries Inc.
  
  We are a group offering variety of Fiberglass items, valves, pipe fittings, steel pipe, flange, auto parts, casting, forging, stamping, machining products and operate OEM services of industries.
  
  Our products range is from agriculture , hardware tools, trailer couplers, auto parts and accessories.
  
  The process form investment casting, sand casting, die casting, forging and machining.
  
  Most of clients of NLD Industries Inc are from United States, Europe and Australia.
  
  Through cooperation with clients we have gotten good reputation across the world.
  
  The team of NLD Industries Inc.
  
  is with high professional and experienced engineers and business staff with long years international operation.
  
  Strict quality control is carried out from raw material to machined finished products.
  
  We have inspections tools of chemical and mechanical property, together with metallographic analysis equipments and other instruments.
  
  There are inspections equipments to supply inspection of each steps.
  
  There are good equipments of casting, forging, welding and machining: boring , milling drilling CNC lathes, and we also have long year operation experienced workers here.
  
  We have ability of meeting different customers requirements in detail.
  
  Our products could meet international quality standard.
  
  We could also provide design assistance and product modification suggestion service.
  
  Our goal is to provide perfect quality, superior value and creative solutions to our customers.
  
  In time delivery time and high quality products are what we are working for.
  
  We are looking forward to building a lasting successful relationship with you.
  
  Contact NLD Industries Inc.
  
  now you will get a competitive offer for your business good development.
  
  Just keep us informed with what you need, we will meet your exact specifications.
  
  Contact person: Ms Candy
  
  Email: candylan@n-le ader.
  
  com
  
  Tel: 86-0351-8336 918
  
  Mobile: 86-18835129450
  
  Wechat: +8618835129450
  
  wh atsapp: +8618835129450
  
  Web: www.
  
  n- leader.
  
  com