Crc Galva Brite Cold Galvanizing Spray - India

1 - GENERAL DESCRIPTION

Protective zinc-aluminum coating.

A single component, zinc-aluminium coating combining corrosion protection properties with the lustre look of aluminium.

Galva Brite is a combination of zinc and aluminium powders, resins and additives, formulated to form a flexible protective film with a bright, glossy appearance.

2 - FEATURES

Excellent touch-up for galvanised surfaces.

Provides excellent corrosion and rust resistance to ferrous metals.

The galvanic properties ensure cathodic protection (the coating becomes the anode).

Unique combination of flexibility and hardness.

Resists rusting, peeling and fading.

Adheres well to metal surfaces.

Combines the galvanised look with the convenience of an aerosol application.

Totally lead and chromate free.

No chlorinated and low-aromatic solvents.

Aerosols use dimethylether (DME) propellant for controlled spray and film properties.

3 - APPLICATIONS

Fences and gates

Home, garden and farm equipment

Construction equipment

Structural steel

Guard rails

Welding seams

Pipes and fittings

Coastal and shipborne installations

Repair of LPG storage tanks

4 - DIRECTIONS

Shake aerosol can very well for at least one minute after agitator ball is free.

Stir or mix bulk product well to obtain a homogeneous dispersion.

Repeat frequently while using.

Apply to a clean, degreased, dry surface for best results.

Remove rust and scale with a wire brush.

Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat.

Additional coats can be applied after 15-20 minutes.

When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes.

If clogging occurs, remove button and clean orifice with fine wire.

Do not use on energised equipment.

Use in well ventilated area.

A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

5 - TYPICAL(*) PRODUCT DATA (without propellant)

Appearance : bright alu finish

Resin type : modified alkyd

Pigment type : zinc, leafing aluminium

Specific gravity (@ 20C)

- aerosol : 1, 06

- bulk : 1, 15

Flash point (solvents)

- aerosol : -4C

- bulk : 27C

Coverage (30 m, dry)

- aerosol : approx.

1, 6 m2/can (400 ml)

- bulk : approx.

12 m2/kg

Drying times

to touch : 10-15 min

to handle : 1 h

complete curing : 24 h

Recommended film thickness : 30-40 m

Thinner / cleaner : white spirit, acetates

Dry film properties (35 m on degreased metal)

Salt spray (ASTM B 117) : 100 h (**) (35 m film thickness)

Adhesion on steel (NFT 30038) : 0

Flexibility (6 mm mandrel, visual) : pass

Heat resistance (4 h @ 200C) : slight yellowing

Hardness Persoz (after 72 h) : 80 s.

Solvent resistance : TBD

CRC AEROSOL, ELECTRICAL MAINTENANCE Spray, CRC 2-26, CRC CO CONTACT CLEANER, CRC LECTRA CLEAN, CRC N F Precision, ONLINE CONTACT CLEANER, CRC URETHANE ISOLATION RED, CRC PLASTIC 70, CRC BATTERY TERMINAL COATING, CRC 3-36, CRC 5-56, CRC GASKET REMOVER, CRC FAST DRY DEGREASER, GALVABRITE, CRC RUST REMOVER, CRC COPPER PASTE, CRC METAL FREE PASTE, CRC HAND CLEANER, CRC ANTI FRICTIONAL TEFLON COATING, CRC FREEZE 75, CRC SP-400, CRC SP - 350

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.