35 visiting now: 15 China China flag 11 USA USA flag 4 Cyprus Cyprus flag 3 Germany Germany flag 1 South Africa South Africa flag 1 Canada Canada flag

Highlighted Companies

Mks Base V1 4 Motherboard - China

price: contact company for price

Model Number: MKS BASE V1.4
cards: 3d diy starter kit
smart controller: marlin breadboard
electronic diy kit: mega 2560/ramps1.4
integrated circuit: 3d devices
3d printing material: electronic stock Notes:
1. Pay attention to positive and negative pole in order to avoid short circuit. If the board burnt out due to reversal connection, we do not warranty! 2. The motor cannot be charged inserted, otherwise the drive might be burnt out.Do not adjust the current during motor operation. The correct approach is to disconnect the power and unplug the motor first, second, please supply power again, then adjust potentiometer and measure the voltage on the potentiometer, until the measured voltage as expected. Features and Advantages:
1. All the functions set on a board to solve the problems that Ramps 1.4 is troublesome and has cumbersome combination interface. 2. Adopt 4982 as a motor driver, its performance the same as 4988, but 4982 packaged with SOP, and the cooling effect is better. 3. The circuit board is made of 4-layer circuit, and is optimized for heat dissipation. Ramps just has 2 layers. 4. Using high quality MOSFET tube, the heat dissipation effect is better. 5. Adopt special power supply chip, support 12V-24V power input, and solve the heating problem of Ramps voltage conversion chip. 6. Accept 24V input, the hotbed current can be reduced to 1/4 with the same system capacity, it solves the heating problem of hotbed MOS tube. 7. you can use the open source firmware Marlin, its configuration the same as Ramps 1.4 and can replace Ramps 1.4. 8. MKS BASE V1.4 control board can be connected to Ramps 1.4, 12864 LCD and 2004 LCD control board. Jiaxing Juboll Technology Co., Ltd.
Add: Chengcheng Road, Jiashan Economic Development Zone, Jiaxing, Zhejiang, China Tel.: +86-573-84023009
Fax: +86-573-84072270
E-mail: sales AT juboll.com
Website: www juboll.com


Company Contact:


  • Phone: 0086-573-84023009

  • Address: Chengcheng Road,Jiashan Economic Development Zone,Jiaxing,Zhejiang,China , Jiaxing, Zhejiang, China

  • Email: Email


Published date: August 28, 2019 -

  • Business Description: Manufacturer of 3D printer motherboard,3D printer parts,stepper motors, Arduino parts, educational robots and robotic peripheral products.

    Jiaxing Juboll Technology Co., Ltd. is a high-tech enterprise specialized in researching and producing 3D printer parts, stepper motors, educational robots and robotic peripheral products.

    Juboll operates manufacturing facilities which are superiorly equipped, professionally staffed, and ISO9001 certified. That allows Juboll to fully understand our customer's applications and work closely with our OEM clients. Our main aim is to be a professional 3D printer parts supplier and provide perfect after-sale services to our partners.

    Juboll offers a full complement of parts for 3D printers,such as control board, driver, hotbed, extruder, nozzle, hardware fittings, filament and other customized parts.

    Based on the collaborations with universities and technological institutes,our dedicated team always push the intelligent technology envelope to the limit and beyond, incorporating the latest 3D printing technology into production, providing effective and durable products to fulfill variable requirements, and help you find the right solution for your 3D printer projects.

    Jiaxing Juboll Technology Co., Ltd.
    Add: Chengcheng Road,Jiashan Economic Development Zone,Jiaxing,Zhejiang,China
    Tel.: +86-573-84023009
    Fax: +86-573-84072270
    E-mail: sales@juboll.com
    Website: www.juboll.com

Related listings



  • Mks Mini V1 2
    Mks Mini V1 2
    Electronic hardware and component parts and accessories - Jiaxing Juboll Technology Co.,Ltd. - China - August 28, 2019 - contact company for price

    Overview MKS MINI is a feature all-in-one electronics solution for Reprap and other CNC devices.It features an onboard ATmega2560. It's four motor outputs are powered by DRV8825 stepper drivers. The board can use the same firmware as Ramps1.4. The mo...

  • Mightyboard Rev G
    Mightyboard Rev G
    Electronic hardware and component parts and accessories - Jiaxing Juboll Technology Co.,Ltd. - China - August 28, 2019 - contact company for price

    MightyBoard Rev G For 3D Printer A DIY Open Source 3D Printer Control Board Description: MightyBoard is a DIY Open Source 3D Printer Control Board designed by MakerBot company, it is mainly used in desktop 3D printer DIY creation. It adapts ATMEGA’s ...

  • Skr Pro V1 1
    Skr Pro V1 1
    Electronic hardware and component parts and accessories - Jiaxing Juboll Technology Co.,Ltd. - China - August 28, 2019 - contact company for price

    Product: SKR PRO V1.1 Appearance Size: 147*95mm Microprocessor: ARM 32-bit Cortex-M4 CPU Input Voltage: DC12V - DC24V Driver Working Mode: STEP/DIR, TMC2130-SPI, TMC5160-SPI, TMC2208-UART Display: TFT28, TFT35, LCD2004, LCD12864 Jiaxing Juboll Techno...



Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"