1ma 1200a 2mhz Oscilloscope Ac Current Clamp Probe S50 Gfuve Multi Ratio 0 1% Accuracy - China

The round jaw design on the S50 Series AC current clamp on CT along with the high content permalloy core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz.

Measurement range is 1mA to 1200A.

The S50 clamp on ct is a general purpose 1200A AC current clamp designed for use with DMMs & BNC, power loggers and energy meter calibration instruments that have a current input.

It has a 1000: 1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw.

The S50 clamp on CT has an integral 2.5m lead terminated.

The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.

Electrical parameters

Ratio: 1000: 1, 2000: 1, 1000: 5 (customized)

Accuracy class: 0.1%, 0.2%, 0.5%

Primary current: 0 - 500A AC and 0-1000A AC

Signal output: 1mV/A, 1mA/A

Secondary voltage: 0 - 0.5V AC and 0 - 1V AC;

Secondary current: 0-1A or 0-5A AC

Max.

Cont.

Input current: 1200A

Load capacity: ≤20Ω, standard 4Ω

Over voltage category: CAT III 600V

Frequency range: 10Hz-10MHz

Dielectric strength: 3KV 50Hz/60Hz at 1minute

Temperature range: -40°C to +55°C

Output: 2.5 meter cable with D01 or BNC connector

Max.

voltage not insulated conductors: 600 V

Standard: EN 61010-1, EN 61010-2-032, EN 61010-2-031

IEC60044-1, & IEC61869-2, 600V CAT III

Installation: clamp type

Range: 10A, 100A, 1000A optional

Output mode: lead output(2.5m)

Connector: BNC, 4mm banana, signal cable(2 cores), customized

Accuracy (1000A Range)

0-10A: ≤0.5%

10-100: ≤0.2%

10-1200A: ≤0.1%

Phase Shift(1000A Range)

0-10A: ≤0.5°

10-100: ≤0.2°

10-1200A: ≤0.1° Mechanical parameters

Dimensions (L x W x H) (mm): 105 x 218 x 30

Weight (g): 650

Holding wire diameter (mm): φ52

Max.

jaw opening (mm): 52

Jaw color: Red & Grey

Material: PC+ABS, UL94 V0

Company Contact:

• Posted By: BEIJING GFUVE ELECTRONICS CO LTD

• Phone: 18901232181

• Address: Oriental HuaRui A No. 150 Guanzhuang Road Chaoyang District Beijing, 100024, China, BEIJING , China

• Email:

• Website: https://www.gfuve.com/

• Business Description: Beijing GFUVE Electronics Co., Ltd. was established in 2005 - It combined science, industry and trade together as one high-tech enterprise.