30 visiting now: 27 USA USA flag 2 China China flag 1 Germany Germany flag

Highlighted Companies

  • zayatine sfax (Tunisia): we are producers and exporters of extra vergin organic olive oil certiefied by ECOCERT with acidity less... http://www.zayatinesfax.com.tn


  • Point Resistance Tester - China

    price: 1.00 Dollar US$

    The point-to-point resistance tester is used to detect the point-to-point resistance rate of anti-static work clothes, which is suitable for class A and b-class anti-static work clothes. The principle is to add test voltage 100 V to test samples for total 15 s. The weak current flowing through the sample is sampled and amplified by the standard resistance and read on the high impedance meter. The figures show the resistance value directly, with high accuracy, quick display, good stability and easy reading. Operation Principle According to ohm's law, the tested resistance Rx is equal to the applied voltage V divided by the current I. The traditional high impedance meter works by measuring the fixed voltage V, and the resistance value is get by measuring the current I that flows through the sampling resistor. As can be seen from the ohm's law, since the current (I) is inversely proportional to the resistance rather than directly proportional, so the display value of resistance is nonlinear. Namely when the resistance is infinite, the current is zero, and the zero level at the header is ∞. The scale interval is very close with a very low resolution, so the whole scale is nonlinear. The voltage V also changes due to the measurement of different resistance, so the normal high resistance meter is low in accuracy with low resolution.
    The point-to-point resistance tester measures the voltage V at the two ends of the resistance and the current I flowing through the resistor at the same time. Through the large scale integrated internal circuit, the calculation of voltage divided by the current is completed. Then, the results obtained through A/D conversion shows digital resistance value. Even though the voltage V at the two ends of the resistance and the current I flowing through the resistor change at the same time, the displayed resistance value will not change like the ordinary high resistance meter subject to the change of the tested voltage V and the current I. So, even if the measured voltage, the measured resistance and power voltage change, it has a little influence on the results. The accuracy is very high (patent), and theoretically the error can be zero, and the actual error can achieve parts per thousand or parts per ten thousand. Standards GB12014-2009, GB/T 1410-2006, ASTM D257-99, GB/T 10581­2006, GB/T 1692­2008, GB/T 2439­2001, GB/T 12703.4­2010, GB/T 10064­2006, GB/T 22042­2008, EN 1149­1­1995, GB/T 1410­2006.


    Company Contact:


    • Phone: +862164200566

    • Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai, shanghai, China

    • Email: Email


    Published date: March 8, 2018 -

    • Business Description: Qinsun Instruments Co., Ltd was founded in 2010,comprised of many experienced engineers and designers standing in the forefront of the industry.

    Related listings



    • Single Wire Cable Burning Tester
      Single Wire Cable Burning Tester
      Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - March 8, 2018 - 1.00 Dollar US$

      The instrument is applicable to the test method and test requirements of single insulated wire or cable combustion under the prescribed flame condition. Standards GB/T 18380.11-2008 Vertical flame spread test of single insulated wire or cable. Test a...

    • Fabric Flame Retardant Test Machine
      Fabric Flame Retardant Test Machine
      Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - March 8, 2018 - 1.00 Dollar US$

      A method is used to determine the damaged area and the length of the damage when the textiles and other materials are burned at 45 °, and the B method is used to determine the number of times the textile contacts the flame at a 45 ° state with hot me...

    • Big 45°method Suture Flame Contact Times Tester
      Big 45°method Suture Flame Contact Times Tester
      Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - March 8, 2018 - 1.00 Dollar US$

      This instrument is used for testing flame exposure times of flame retardant protective clothing stitches. Standards GB 8965-1998 Flame-retardant protective clothing Appendix B test methods for flame exposure times of seams Technical Parameters Items ...



    Safe Trade Tips

    • Ask for business references and check them
    • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
    • Verify their business via their local Chamber of Commerce
    • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
    • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
    • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"