38 visiting now: 29 USA USA flag 4 China China flag 1 Vietnam Vietnam flag 1 Ireland Ireland flag 1 Japan Japan flag 1 Russia Russia flag 1 Ukraine Ukraine flag

Highlighted Companies

  • zayatine sfax (Tunisia): we are producers and exporters of extra vergin organic olive oil certiefied by ECOCERT with acidity less... http://www.zayatinesfax.com.tn

  • Multipoint Simultaneous Pore Structure Analyzer - China

    price: 1.00 Dollar US$

    All the models of this instrument are similar. In one model the sheet to be tested is made to pass through two flat parallel plates. The top plate has straight through cylindrical holes to accommodate inverted cup shaped sample chambers and about two inch diameter samples. The bottom plate also has through holes aligned with the holes in the top plate. There are five chambers over the product width of about twenty inches. The chamber has gaskets at its bottom rim to make pressure tight seal with the sheet when the chamber goes down the hole in the top plate to make contact with the sheet. The top of the chamber is connected to the pressure transducer to measure pressure just above the sample. The sample chamber is also connected to gas line to supply pressurized gas to the chamber. The outlet of a small valve for discharging specified amount of wetting liquid on the sample in the sample chamber is allowed to pass in to the chamber. The valve is computer controlled to discharge the wetting liquid at the desired time. Working Principle Capillary flow porometry is used to characterize the pore structure. In this technique flow rate of an inert gas through the sample is measured in dry conditions as a function of differential pressure. The sample is wetted using a wetting liquid and the flow rate of the inert gas through the wet sample is measured as a function of differential gas pressure. Differential pressure yields pore diameter. D = 4 γ cos θ / p
    Dry and wet gas flow rates are used to compute other pore structure characteristics such as pore distribution and mean flow pore diameter. D = pore diameter, γ = surface tension, θ = contact angle, p = differential pressure. Dry flow rate is also used to compute gas permeability after Darcy’s law. Liquid flow rate measured as a function of differential pressure yields liquid permeability. Applications During the manufacturing process, many finished and unfinished sheet products of woven as well as nonwoven materials are produced as rolls. To be able to decide on the suitability of the product for various applications and to control manufacturing parameters for optimizing manufacture of product of desired quality, pore structure characteristics of the product along its width and the length are required. In order to be assured of the quality of the product multi point tests on the width of the product as a function of product length is desirable. Multipoint Simultaneous Pore Structure Analyzer is designed for such applications. Features
    · Properties are recorded as the sheet is getting rolled. There is a permanent record of pore structure characteristics of the entire roll
    · If properties are not within acceptable limits along the width or the length, the unacceptable portions can be discarded rather than supplied to customers creating customer dissatisfaction and increased cost.
    · Major faults detected early leads to modification of production control parameters so that more accept able products are manufactured.
    · Wastage is minimized, cost is reduced, and production is optimized.

    Company Contact:

    • Phone: +862164200566

    • Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai, shanghai, China

    • Email: Email

    Published date: March 8, 2018 -

    • Business Description: Qinsun Instruments Co., Ltd was founded in 2010,comprised of many experienced engineers and designers standing in the forefront of the industry.

    Related listings

    • Convective Heat Resistance Tester
      Convective Heat Resistance Tester
      Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - March 8, 2018 - 1.00 Dollar US$

      The instrument is used to determine the thermal resistance of protective clothing materials or samples and protective equipment by exposing the sample in the test condition of hot air circulation oven. Application The equipment oven is designed to te...

    • Point Resistance Tester
      Point Resistance Tester
      Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - March 8, 2018 - 1.00 Dollar US$

      The point-to-point resistance tester is used to detect the point-to-point resistance rate of anti-static work clothes, which is suitable for class A and b-class anti-static work clothes. The principle is to add test voltage 100 V to test samples for ...

    • Single Wire Cable Burning Tester
      Single Wire Cable Burning Tester
      Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - March 8, 2018 - 1.00 Dollar US$

      The instrument is applicable to the test method and test requirements of single insulated wire or cable combustion under the prescribed flame condition. Standards GB/T 18380.11-2008 Vertical flame spread test of single insulated wire or cable. Test a...

    Safe Trade Tips

    • Ask for business references and check them
    • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
    • Verify their business via their local Chamber of Commerce
    • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
    • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
    • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"