16 visiting now: 6 China China flag 6 USA USA flag 3 Germany Germany flag 1 Russia Russia flag

Highlighted Companies

Microflow Porometer - China

price: 1.00 Dollar US$

The PMI Microflow Porometer is a Capillary Flow Porometer with the ability to measure pore structure and permeability in nearly impermeable materials. This instrument is user-friendly and fully automated. The Microflow Porometer is an asset in quality control and R&D environments. Operation Principle In this instrument a pressure transducer is located on the downstream side of the sample and the time rate of pressure change in the known volume of the down stream side of the sample chamber is used to compute very small flow rates. The flow rate through dry samples is measured according to the differential pressure. Under the increasing pressure, the gas flows into the back of the completely wetted samples in the chamber. When the pressure increases enough to overcome the point where the capillary of the liquid works in the hole (maximum hole), that point is the bubbling point. After confirming the bubbling point, increase the pressure and measure the flow until all the holes are empty and the sample is dry. Application The microflow porometer is mainly used to determine the characteristics of low permeability membrane (gas separation membrane). The instrument is suitable for packaging, rubber abd special gas manufacturing companies.
Applied industries:
Automobile manufacturing Battery separator Ceramics Filtration Geofabrics Nonwoven Paper Pharmacy Textiles Features · Samples permitting very low flow rate can be tested
· Very low permeability can be measured
· Fully Automated
· Windows based simple operation
· Provide other optional features Technical Parameters Items Parameters
Pore Size Range 0.013 - 500 microns
Permeability Range 1x 10- 1x 10- (microflow in cc/sec/m/torr)
Sample size 0.5” - 2.5” diameter
Pressure transducer range 0~500psi
Resolution 1 in 20, 000
Accuracy 0.15% of reading
Pressurizing gas Clean, dry, and compressed air or nonflammable and non-corrosive gas
Mass flow transducer range 10cm/minute~500, 000cm/minute
Power requirements 110/220VAC, 50/60Hz (Others Available)
Dimension 30” H x 19” W x 18.5” D
Weight 100lbs

Company Contact:

  • Phone: +862164200566

  • Address: No. 2578 Minhang District Gu Dai Road, Shanghai, Shanghai, shanghai, China

  • Email: Email

Published date: February 28, 2018 -

  • Business Description: Qinsun Instruments Co., Ltd was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry.

Related listings

  • Four Door Two Cap Durable Test Stand
    Four Door Two Cap Durable Test Stand
    Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - February 28, 2018 - 1.00 Dollar US$

    Real door electric glass lifter and manual lift is used to finish the performance and durability test. White car body and real car (passenger car) are installed the test bench. The installation is scientific and convenient. You can choose to drive di...

  • Pedal Performance Endurance Test Bench
    Pedal Performance Endurance Test Bench
    Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - February 28, 2018 - 1.00 Dollar US$

    This test bench can test the car pedals. The test results can be used to decide whether the products are qualified, and maintained for statistics, analysis, storage and printing. Standards QC/T788-2007 The performance requirement of the car pedal dev...

  • Integrity Analyzer
    Integrity Analyzer
    Electrical equipment and components - Qinsun Instruments (Shanghai) Co., Ltd. - China - February 28, 2018 - 1.00 Dollar US$

    The Integrity Tester provides fully automated analysis of filter integrity. The integrity test detects small amounts of flow through the sample before the bubble point is reached. The user-friendly Integrity Analyzer features non-destructive testing ...

Safe Trade Tips

  • Ask for business references and check them
  • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
  • Verify their business via their local Chamber of Commerce
  • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
  • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"