31 visiting now: 27 USA USA flag 3 Germany Germany flag 1 Russia Russia flag

Highlighted Companies

  • Muslima Wear (Turkey): Hijab, Shawl, Scarf, Ferace, Pardesu, Abiye, Tesettur, Esharp, Jilbab, Abaya, Niqab, Turban, Islam Mode, Islam... https://muslimawear.com/

  • Hackrf One - China

    price: 180.00 Dollar US$

    HackRF One is the current hardware platform for the HackRF project. It is a software Defined Radio peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.


    half-duplex transceiver
    operating freq: 1 MHz to 6 GHz
    supported sample rates: 2 Msps to 20 Msps (quadrature)
    resolution: 8 bits
    interface: High Speed USB (with USB Micro-B connector)
    power supply: USB bus power
    software-controlled antenna port power (max 50 mA at 3.3 V)
    SMA female antenna connector (50 ohms)
    SMA female clock input and output for synchronization
    convenient buttons for programming
    pin headers for expansion
    open source
    Transmit Power

    HackRF One's absolute maximum TX power varies by operating frequency:
    Through most of the frequency range up to 4 GHz, the maximum TX power is between 0 and 10 dBm. The frequency range with best performance is 2150 MHz to 2750 MHz.
    Overall, the output power is enough to perform over-the-air experiments at close range or to drive an external amplifier. If you connect an external amplifier, you should also use an external bandpass filter for your operating frequency.
    Before you transmit, know your laws. HackRF One has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally.
    Receive Power

    The maximum RX power of HackRF One is -5 dBm. Exceeding -5 dBm can result in permanent damage!
    In theory, HackRF One can safely accept up to 10 dBm with the front-end RX amplifier disabled. However, a simple software or user error could enable the amplifier, resulting in permanent damage. It is better to use an external attenuator than to risk damage.
    10 MHz to 2150 MHz: 5 dBm to 15 dBm, generally increasing as frequency decreases
    2150 MHz to 2750 MHz: 13 dBm to 15 dBm
    2750 MHz to 4000 MHz: 0 dBm to 5 dBm, increasing as frequency decreases
    4000 MHz to 6000 MHz: -10 dBm to 0 dBm, generally increasing as frequency decreases.

    Company Contact:

    • Phone: +8613632446856

    • Address: 3F,Block B1,HengFeng Ind.Zone,Hezhou,Xixiang,BaoAn, Shenzhen, Guangdong, China

    • Email: Email

    Published date: December 20, 2016 -

    • Business Description: Shenzhen Cirket Electronics Co.,Ltd ,established in 2007 ,is a civil enterprise with registered capital RMB 2,000,000.00 and total investment RMB 20,000,000.00.It has a 5,000 square meters factory, specialized all kinds of electronic product's OEM and ODM. Our full turn-key solution including PCB fabrication, component sourcing, SMT, DIP, and manual soldering. We also do function test mechanical packing. Our main product are security product, MID, PC HD player, home applications, ammeter, industrial power supply and communication product.
      There are 10 new YAMAHA YG,YS series high speed chip mounter,7 YV,YG and YS multi-function chip mounter,1 PANASERT high speed mounter. Reflow soldering oven are GangYang 8 oven ROHS compliance machine , and two set Jingtuo 10 oven reflow soldering machine, 3 set Haobao double conveyor 10 oven reflow soldering machine. Besides there are 4 full automatically solder past printer and 8 half automatically. Other machines like AOI,X-RAY Inspection, BGA reball and repair machine, wave soldering machine, all are completely set up. There are totally 7 SMT lines,4 DIP line,4 manual soldering lines, and 3 mechanical assembly lines.
      Cirket has 318 employees, half of them are more than 4-year experienced. 70% of our engineers and staff are more than 6-year experienced. SMT capability is 9,500.000 chips per day, DIP 2,500,000 pieces per day. The complete set up machine and equipment, UL standard, RoHS compliance and ISO managing system can help us to offer high quality product to our customers in time.
      Shenzhen has the biggest electronics market in Asia, we have good business relationship with main E-component manufacturers for a long time, such as NS, TI, ON, Fairchild, ST, microchip, and so on. So, we can get quotation and components rapidly and widely with most competitive price in the shortest time. Nowadays, we have client from middle east, Germany, UK, Italy, Sweden, Russia, Poland, Canada, USA, etc. We hope to work with more customers around the world. There is no MOQ for quantity, both prototype and mass production are welcome.

    Related listings

    • Silicon Steel Stamping And Lamination For Bldc Motor Stator Core
      Silicon Steel Stamping And Lamination For Bldc Motor Stator Core
      Electrical equipment and components - Shenzhen Jiaye Industrial Equipment co., ltd. - China - December 18, 2016 - 10.00 Dollar US$

      Our service: 1. Motor stator and rotor core lamination 2. Motor stator customization with 3. Stator Punching and stamping mold design & manufacturing 4. Stator Prototype sample customization with wire cutting and laser welding. 5. Stator epoxy co...

    • Juki Feeder Ff44fr
      Juki Feeder Ff44fr
      Electrical equipment and components - ZK Electronic Technology Co., Limited - China - December 14, 2016 - 1500.00 Dollar US$

      Juki feeder FF44FR FF8MM FF12MM FF16MM FF24MM FF32MM FF44MM FF56MM CF8X2MM CF8X4MM ATF8X2 ATF8X4 ATF12MM ATF16MM ATF24MM CF03HP FF44FS We're highly specialized in JUKI, pls contact us if you have any demand for JUKI machine or idle asset for it. At t...

    • Smt Nozzle Juki 504
      Smt Nozzle Juki 504
      Electrical equipment and components - ZK Electronic Technology Co., Limited - China - December 14, 2016 - 25.00 Dollar US$

      Smt nozzle juki 504 e3603-729-0a0 juki nozzle 504 assy 40001342 juki nozzle 504 assy in stock, could be used for juki ke2000 series pick and place machine, we have original new type and copy new with high quality type, if you are intetested in them, ...

    Safe Trade Tips

    • Ask for business references and check them
    • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
    • Verify their business via their local Chamber of Commerce
    • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
    • Get to know more about scams to avoid: Internet Crime Complaint Center - International Financial Scams
    • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"