61 visiting now: 50 USA USA flag 8 Singapore Singapore flag 2 China China flag 1 Germany Germany flag 1 Hong Kong Hong Kong flag 1 UK UK flag

Highlighted Companies

  • Sollex AB (Sweden): Sollex is a Swedish supplier of industrial knives for plastic film manufactures, plastic recycling, packaging, paper,... https://www.sollex.se
  • Butyl Rubber Tape For Automotive Wiring Harness - China

    price: 8.00 Dollar US$

    YD-81 Butyl rubber tape for automotive wiring harness Characteristics

    A black, high quality, strongly adhesive sealing band based on butyl rubber with plasto-elastic properties.

    The particularly strong tackiness provides a firm lamination between the contact surfaces and, therefore, a reliable sealing effect.

    YD-81 is self-welding.

    Higher temperature influence for a short time has no adverse effect on quality and function.

    YD-81 is aging resistant and is used for numerous application purposes due to its excellent adhesion to cleaned metallic and non-metallic material surfaces.

    For industrial line production YD-81 is also available in 50 l hobbocks and can be applied by suitable equipment which can be heated.

    Technical Data Colour black Density ca.

    1.26 g/cm3 Consistency soft, plasto-elastic Solids 100 % Elastograph value: ca.

    0.115 Nm Penetration (cone 150 g, 6 s, 23°C) ca.

    65 1/10 mm Tackiness very strong Overpaintability can be painted In service temperature range -40°C to 80°C Temperature resistance Short exposure (up to 1h) 200°C Storage Frost-sensitive no Recommended storage temp.

    10°C to 25°C Shelf-life 24 months (virtually unlimited when stored cool and dry)

    application.

    jpg Application areas

    YD-81 is used for sealing and bonding in the areas listed below:

    – sealing, antiflutter and bonding of trim panels, protective and covering trims, protective panels in the container and tank manufacture

    – sealing of overlapping steel, steel sheet, aluminium, glass and plastic constructions in the sheet fabricating industry, in the electrical industry or in apparatus and machinery engineering

    – bonding of PE foils, plastic sheets (e.g. EPDM) or parts in plastic engineering and manufacture

    – as protection against contact corrosion between steel and nonferrous metals

    – in the electrical industry for sealing and bedding parts with low vibration.

    Preparation for sealing

    The surfaces to be sealed must be dry, free of oil, dust, grease and other contaminants(e.g. release agents).

    On porous substrates we recommend the use of Primer-188 - Precheck compatibility with the substrates prior to use on plastics.

    Application as sealing strip

    Cut to the required length and then applied to the substrates to be sealed and lightly pressed on.

    We recommend that removal of the release paper or release foil occurs only after application, and pressing on.

    In that way, an unwanted stretching of the strip during unrolling can be prevented, and the sealing band is protected against contamination as well.

    After pulling off the release paper the counterpart is put on and – if necessary – the entire part is mechanically fixed.

    Service temperature -50°C to 105°C Electrical Properties 1 - 1016 0hm*cm Solids 100% Advantages No need to surface preparation Water vapor resistant Corrosion resistant High flexibility Low-temperature resistant Zhejiang Good Adhesive Co., Ltd., established in 1996, specialize in manufacturing, researching and developing hot melt adhesive.

    Our products cover various applications such as Bookbinding, Packaging, Pest control, Air filter, etc.

    Warmly welcome cooperation and wish to establish business relationship with you! FAQ Q: How long can we get the samples?

    A: We will send out samples within 3 days after order confirmed, and rest time depends on the speed of express company and the distance, totally around 7 days.

    Q: Can we palce order below 1, 000kgs?

    A: Yes, but the unit price will be a little higher than normal since the unit cost of this order rises.

    Q: Can you make special packing for us?

    A: Yes, we can pack goods in blank bag/carton, and stick paper label writing with what you want.

    Other special packing depends on the difficulty and cost.

    Q: Can we buy through our China office?

    A: Of course, please kindly provide us the contact information of your China office.

    Q: How can we visit your company?

    A: We're located in Tongxiang City, just about 150km away from Shanghai and 65km away from Hangzhou.

    You can take the train to Tongxiang station or at Hangzhou, we will pick you up.


    Company Contact:


    • Phone: 008657188805672

    • Address: No.99 Nanhui Road,Heshan Town Industrial Park, Tongxiang , zhejiang , China

    • Email: Email


    Published date: July 25, 2017

    • Business Description: We Zhejiang Good Adhesive Company Limited, established in 1996, a member of China Adhesive Institute.

      We covers an area of about 20 acres and the total investment reaches more than 20 million china yuan.



      We have our own research and development team, can design the glue according to your requirements, and have the right of export and import.

      We specialize in researching, producing and selling hot melt glue, pressure-sensitive adhesive, animal glue, glue stick and so on.

      The applications cover bookbinding, packaging, tape and label, pest control, automobile, shoes and so on, you can see all this on the catalogue.

      Our customers are all around the world, we have customers in Southeast Asia, South Asia, Middle East, Europe, North America and South America, Africa and so on, and I hope you can be the next.

    Related listings



    • Hot Melt Adhesive For Book Binding In Spine
      Hot Melt Adhesive For Book Binding In Spine
      Compounds and mixtures - ZHEJAING GOOD ADHESIVE CP.,LTD. - China - July 25, 2017 - 2.50 Dollar US$

      YD-2AB Hotmelt Spine Glue Granule for Bookbinding Product Description Material EVA (Ethylene vinyl acetate copolymer) and Viscosity resin Appearance Milk white granule Soften Point ≥82°C (GB/T15332-1994) Viscosit y(180°C) 2500±500mpa·s (HG/T3660-1999...

    • Recombinant Tomm70a
      Recombinant Tomm70a
      Compounds and mixtures - Flarebio Biotech LLC - China - July 20, 2017 - contact company for price

      Product Name: Recombinant Human Mitochondrial import receptor subunit TOM70(TOMM70A) Product Type : Transmembrane Protein Code : CSB-CF024055HU Species : Homo sapiens (Human) Gene Names : TOMM70A Synonyms:KIAA0719 ,, TOM70 Protein Names : Recommended...

    • Recombinant Lrfn3
      Recombinant Lrfn3
      Compounds and mixtures - Flarebio Biotech LLC - China - July 20, 2017 - contact company for price

      Product Name: Recombinant Rat Leucine-rich repeat and fibronectin type-III domain-containing protein 3(Lrfn3) Product Type : Transmembrane Protein Code : CSB-CF013079RA Species : Rattus norvegicus (Rat) Gene Names : Lrfn3Synonyms:Salm4 Prote in Names...



    Safe Trade Tips

    • Ask for business references and check them
    • Use a payment method that offers better protection for all such as Letters of credit and verified professional escrow services. Avoid payments in advance such as money transfers
    • Verify their business via their local Chamber of Commerce
    • Search the internet using their website address, their business name, their phone and fax numbers, and their email addresses to see if you can find any feedback about them.
    • Get to know more about scams and fraud to avoid: Internet Crime Complaint Center - Consumer Financial Protection Bureau
    • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"