Worldbid International Trade Leads Import Export b2b Marketplace

Home / Showrooms / Category Showrooms / Showroom Home

COMPANY PROFILE

We do import & export of plant equipments to the world market, last year our business value was 63 million US dollars. The Machinery, Equipment and Production Lines for Export 1. Food processing Lines A. Instant Noodle production Lines - FMX - 1 (Frying) Instant Noodles Production Line (10,000packs/8hrs; 30,000packs/8hrs; 60,000packs/8hrs; 100,000packs/8hrs; 120,000packs/8hrs) - WFMX - 3 (Frying) Instant Noodles Production Line (30,000cups/8hrs; 60,000cups/8hrs; 120,000cups/8hrs) - Instant Rice Noodle Production Lines - Rice Slice Noodle Production Lines - Dried Noodles Production Line. (2.5-6 tons/each shift) - Low Temperature Drying Noodles Production Line ( 2.5-5 tons/each shift ) B. Biscuits & Cookies Production Lines Equipment (300MT/y - 10,000MT/Y) 2. Vegetable Oil Processing Plant Equipment We provide the advanced equipment of oil pressing and oil solvent extraction. Our customers appraise us for our products of high quality and advanced technology. With a group of experienced and well-trained specialists, whether expanding your existing facilities or planning a new factory, we can support your growth with complete engineering and project management. We can offer both single source responsibility and total system integration. We can optimize plant productivity, construction management, training, co-operative management and after-selling-service. With our experience in designing and installing over more 180 oil mills both in China and abroad in past decades, we want to reduce your risk and expedite project completion on time and on budget. We are good at TURNKEY PROJECT. We provide the following production lines: a. Complete Equipment of Oil Seed Pre-treatment and Pre-pressing b. Oil Solvent Extraction Complete Equipment c. Oil Solvent Extraction Complete Equipment d. Oil Refining Complete Equipment We have some single Oil Press Machines, which are suitable for pressing various kinds of oil crops, such, soybean, cottonseed, rapeseed, peanut, sunflower seed, etc. 3. Communication/Power Cables Production Line Equipment Our cable production equipment are widely used in basic wires production in many China companies. Advanced technology is adopted in our equipment, such as: computer control, photoelectric measure, auto-signal tracing, etc. They are capable to produce various kinds of communication and power cables of copper. The production line mainly consists of moulding drawing mach ine, annealing machine, extruder, stainless steel water trough, diameter measuring device, sparking plug, drawing machine. It has the feature of harmonious work, excellent performance stability. Polyethylene, PVC are used as the main raw materials. With our experience of past 35 years in 200 projects in designing, manufacturing, installing, commissioning and personnel training, we are confident in expanding your existing facility or planning new factory, and meanwhile to reduce your risk and expedite project completion on time and on budget. 4. Industrial Gases Plant Equipment We provide the following Industrial Gases Plant Equipment to our worldwide users: Chemical Industry Reaction Gases for Industrial Production. Insert Gases for the prevention of Fire and Explosions. Cryo-technical Processes for Controlled Refrigeration, Cold Grinding and Biotechnology. Oxygen for Combustion Processes. Special Gases for Laboratory Use. Plant for Recovery. Food Technology Refrigeration Technology: rapid freezing, cold storage, and in-transit refrigeration. Metallurgy Heat Treatment: annealing, tempering, carbonizing, nitriding, soldering, sintering. High Temperature Processes: melting, combustion, purging, purifying.. Glass: oxy-fuel heating shielding gas for float glass production, glass fibre production, insulation gases for double glazing, fluorination for surface treatment of plastics. Cutting & welding gases: argon, argon mixtures, helium, acetylene, oxygen, nitrigen as wellas a wide spectrum of newly developed products. Electronics Special Gases for manufacturing electronic components, such as: semi-conductors. Advice, planning, construction and start-up of gas supply system. Environmental Technology Treatment of drinking water, waste water treatment. Health care Gases for therapy and diagnostic. Home care. Clinic care. Cryo therapy, cryo conservation, cryo surgery. Supply of Gases Gas cylinders and containers. Pipeline system. Cryogenic storage vessels. Superinsulated transfer lines. Superinsulated containers for low temperarture, liquid gases such as: helium and nitrigen. More than 400 sets of Industrial Gases Plants have been widely used in metallurgical, petrochemical, fertilizer machinery, food machinery with good performance and high quality, in China and exported over dozens Air Separation Plants to Indonesia, India and the Philippines, and obtained ASEM Certificate and "U" stamp, and ISO9001: 94 certificate. We provided two sets of large Air Separation Plants, one for Baoshan Iron & Steel Co, 30,000N m3/h and Ercheng Iron& Steel Co, 6,000N m3/h , the other for Anshan Iron & Steel Co, 15,000N m3/h. 5. Grinding Disc?Abrasive Wheel or Cutting-off Wheel? Production Lines 1). Grinding Discs (wheels) Production Line (f100mm-f230mm; Capacity: 300,000pcs – 1,000,000pcs/yearly) 2). Cutting-off Wheels Production Line Equipment (f250mm – f450mm; Capacity: 100,000pcs - 1,000,000pcs/yearly). 3). Abrasive Paper/Cloth Production Line Equipment (specifications and capacity at use’s requirements). 4). Abrasive wheels Production Line Equipment (Capacity: accordingly). 5). Diamond Saw Blades Production Line Equipment (Capacity: according). 6. PVC Window Production Line Equipment We manufacture complete profile extrusion lines for main and auxiliary profiles for all output ranges; high speed profile extrusion lines and raw material preparation plants; complete fabrication lines in horizontal design for all levels of products. With our many years experience, we will offer production and product-development know-how which includes the development of window systems, complete extrusion know-how from the powder to the finished profile, complete window manufacturing know-how and the transfer of technical and marketing knowledge in these fields. Our experience and know-how allow us to develop special window systems in taking full account of the different climatic and commercial requirements of the individual markets concerned. 7. Super-high Press For Synthetic Diamond & Super-hard Materials This press is a super-high pressure device of six pressure sources, with distinctive structure. The main body and high pressure device of six pressure sources, with distinctive structure. The main body and oil circuit is computer-controlled. It's automatically to track the pressure and heating power. This device is a ideal machine for synthesizing diamond and super-hard materials. Parameters: Nominal pressure: 13.5MN/persingle jar. Hydro-cylinder control precision: +/-0.1mpa. High-pressure cylinder: ?400mm. Heating system capacity: 50KVA. We guarantee that this machine produces high-quality products at very competitive cost. It has been well adopted in many factories in Chinder control precision: +/-0.1mpa. High-pressure cylinder: D?00mm. Heating system capacity: 50KVA. We guarantee that this machine produces high-quality products at very competitive cost. It has been well adopted in many factories in China 8?Complete Plant Equipments of MDF, Plywood, and Particle Board Production Lines Capacity: 10,000M2; 15,000M2; 20,000M2, 30,000M2 etc. With all advanced equipments, the forming, single flat/multi layer presses, sanding machines etc. Present users available for visiting. Good machines at competitive prices. We also have other plant equipments: a. WOODEN & NON-WOODEN PARTICLEBOARD EQUIPMENT b. CEMENT FLAKEBOARD EQUIPMENT c. COMPLETE EQUIPMENT FOR SECONDARY PROCESSING OF WOOD-BASED PANELS d. COMPLETE GYPSUM FLAKEBOOARD EQUIPMENT e. PANDEL FURNITURE EQUIPMENT f. . COMPLETE BLOCKBOARD EQUIPMENT, COMPLETE COMPOSITER WOOD EQUIPMENT. 9. Packaging Machine We provide two kinds of Packaging Machines for packing: A. One is shrink packing machine for packing of bowl and box instant noodles and for collective shrink packing of lactic drinks, beverage, stationery, batteries, soaps, daily necessities, machine parts and etc. Another kind of packing machine for packing instant noodles, biscuits, medicines, soaps, tissues, ice cream, chocolate, instant frozen foods, tea, cofee, seasonings, chemical products, and machine parts, daily necessities etc. The machine has completed solved the bag-dropped and bag-cut problem during the packing process. B. Loose and un-sticky granular products including food stuffs, medicines, tea, soap powder, fragmental tea, medicinal tea, coffee, monosodium glutamate, granulated sugar, chrysanthemum articles and granulated medicinal drink, medicines, plants seeds, C. Various products with free-flowing including oil and oil mixed with fragment of rationed spice within snack foodstuffs, and suitable for automatically packaging of pure liquid including foodstuffs, medicines, daily chemicals and chemical products. 10. Small-sized Bar Beer Brewery Equipment We provide small-siz ed Beer Brewery Equipment. Capacity: (100L/d--2,000L/d). It's the best choice for hotel, restaurant, entertainment center nightclub and shopping center. Such a small beer brewery is the short cut to make your business characteristics. With American technology, it's fermenting in a short time under high-temperature. It make varied and special flavor beers at the same time, such as, pure beer, black beer, red beer, strawberry beer and etc, which are of conquering color, high quality, rich vitamin and amino acid. The computer-controlling system makes it easy to operate and brew excellent beer. The brewery cost small investment and spaces a small production room, while bringing you profit and joy, with its first workmanship and best quality. 11. Brick & Tile Plant Equipment With 30 years experience in manufacturing brick & Tiles production machines, we have great ability to provide many series of plant equipments of de-airing & nude-airing brick & Tiles, using clay, pulverized coal ash, gangue, shale and red sandy soil as raw materials in production of standard solid, porous and hollow bricks bearable & unbearable so as to same energy and soil main products: 4 nude-airing Extruder, De-airing Extruder, Double-shaft Screening Mixer, Double-roller Crusher, Box Feeder, Green Brick Cutting Machine. Automatic Clay Slug Cutter. Roller Mill. Capacity: 10,000 pcs/8hrs- 200,000 pcs/8hrs. 12. Detergent & Laundry Products Production Equipment Soap Powder (detergent) Production Line Equipment Type: both high density & low density. Capacity: 0.5t/h, 1t/h, 2t/h, 4t/h 6t/h. Toilet Soap, Laundry Soap Production Line Equipment Capacity: 300kg/h, 500kg/h, 800kg/h 1500kg/h Cosmetics Production line Equipment Shampoo, skin creams, lotions, etc. 13. Homgenizer We provide SLS Model Homogenizers of different capacities: From 100L/hr - 5,000 Liters/Hr; Working pressure: 250 - 700 Bar. Continual Working Pressure: 0-200 0-560. Used in: Food & drink: enzymes, dressings, tomato souses, puddings, f ruit paste, butter oil, Cocoa, Coffee, fruit juice, vegetable protein drink, daily drink, ice cream, baby food, chocolate, milk powder; Biotechnology: cell disruption of yeast E coil, bacteria and algae; Cosmetics: hair products, skin creams, lotions, perfumes, shampoos, and conditioners; Pharmaceutical: antibiotics, antacids, cream intravenous, emulsions, ointments, tablet coating, liposome’s; Chemicals: disinfectants, emulsifiers, fuel oil, insecticides, paints, oil emulsions, silicone emulsions, wax emulsions, lubricants, resins/rosins, latex, viscosity improvers. The homogenizer are manufactured with special alloy steel valves, sealing materials and the sealing materials and the sealing materials and the advantages of maximum flow, good smashing function, more durable and longer life. 14. Construction Materials Production Line Equipment 1). Plasterboard Production Line of 1,500,000- 2,500,000 M2/y; 2). Gypsum Board Production Line of 6,000,000 M2/y; 3). Gypsum Block Production Line of 140,000 - 190,000 M2/y; 4). New Production Process for Stucco of15,000 tons/y; 5). Fly Ash (sand) Aerated Concrete Production Line of 100,000M3/y; 6). Fly Ash Floor Tile Production Line of 200,000m2; 7). Concrete Load-bearing Block Production line of 30,000MT 8). Silica Sand Brick production Line of 10,000,000 pcs/y; 9). Color Cement Tile Production Line 2,000,000pcs/y; 10). Colored Light Steel Compound Board Production Line of 600,000M2; 11). GRC External Wall Board Production Line of 4,000,000M2; 12). Silica Calcium Board without Asbestos Production Line of 1,000,000M2; 13). Fiber Reinforced Flat Cement Board without Asbestos Production Line of 500,000M2; 14). Magnetite Cement Series Products production Line of 500,000M2; 15). Cement Slurry Diluent Production Line of 500tons/y; 16). Glass Carpron (PC) Board Production Line of 10,000tons/y; 17). SBS Modified Asphalt Waterproof Roll Production Line; 18). FWZ Series Complex Glazed Corrugated Sheet (CGCS) Production Line; 19). The Horizontal Flat & Bending Tempering Glass production Line; 20). Glass Fiber Products Production Line. 15. Paper/plastic Cups Production Line Equipment Colors: 2 - 4 colors. Capacity: 30 - 45pcs/min. Paper board(material): 180 - 280g/m2. Volume: 4-22ounces/cup. Products: Paper cups for coca cola, juice, mineral water, and other drinks. 16. Heater & Heating Equipment - Solid -state High Frequency Induction Heating Device - High-frequency Induction Heating Device - Super-audio-frequency Induction Heating Device - Computer-controlled Thyristor Intermediate Frequency Power Supply System - High Frequency Welding Tube Induction Heating Device - High Intermediate Frequency Heating Hardening Machine Tool - D.D. Speed Control - High-grade Negative Thread PC Reinforcement Heat-treatment Production Lines High-grade Negative Thread PC Reinforcement Heat-treatment Production Lines High-grade Negative Thread PC Reinforcement Heat-treatment Production Lines 17? Medical Equipment JT - 33 ultrasound real-time linear scanner JT - 3400 Ultrasound Linear Scanner JT - 3800 Ultrasound Linear Scanner SD - 3800 Ultrasound Linear Scanner SD - 2801 ultrasound real time sector scanner - WD-ESWL98 Lithotriptor with Ultasound & X-RAY Localization WD-ESWL91 Lithotriptor with Ultrasound Scanner - Multi-localization Micro-circulation Microscope L2000 Series Shadowless Operation Lamp ZF Series Shadowless Operation Lamp Apertured Series Shadowless Operation Lamp Multi-picture and Panoramic Camera Color TU System with Shadowless Lamp Mobile Medical Diagnostics X-ray Units. a. 30mA Mobile Medical Diagnotics X-ray Unit 50mA Medical Diagnotics X-ray Unit 100mA Medical Diagnotics X-ray Unit 200mA Medical Diagnotics X-ray Unit 300mA Medical Diagnotics X-ray Unit 400mA Medical Diagnotics X-ray Unit with Computer Control System 500mA Medical Diagnotics X-ray Unit XG101 Stationary Medical Diagnotics X-ray Unit X-ray Unit for Mammography Panoramic X-ray Unit for Oral Examination Mobile Intellingent X-ray Unit b. Medical Electron Linear Acceleartor Radiotherapy Simulator Rotional Cobalt-60 Tele-therapy Units c. All kinds of Steam Sterlizers(table, portable, vertical & horizontal types) d. Operating Lamp Cold Light Shadowless Operating Lamp with 12 Reflectors. Ordinary Light Shadowless Operating lamp with 12 reflectors Cold Light Shadowless Operating Lamp with 9 Reflectors Ordinary Light Shadowless Operating Lamp with 9 Reflectors e. Dental equipments. 18. Plastic Woven Bags Production Line Equipment Capacity: 5,000,000pcs - 30,000,000pcs/yearly. 19. Drink Machinery 1). Mineral Water Production Line & Technology (2,000 - 6,000 bottles/h, 500ml). 2). Pure Water Production Line & Technology (2,000 - 6,000 bottles/h, 500ml, 120 bottles/h, 5 gallons). 3). Gas Containing Drink Production Line & Technology (2,000 - 8,000 bottles/h, 250ml). 4). Fruit Juice & Fruit Tea Production Line & Technology (2,000 - 6,000 bottles/h, 250 - 450ml). 5). Filling /Capping Production Line , GFP12A. (For water, juice, source vinegar and wine, 2,000 - 2,500 bottles/h) 6). Bottle (5 gallons) Filling Production Line, QGF-120 (80 - 120 bottles/h, 5 gallons). 7). Negative Pressure Filling Machine Series, (1,500 - 6,000 bottles/h). 8). Automatic Sour Milk, Jerry Step Injecting And Sealing Production Line. 9). Automatic Bottle Filling and Capping Production Line. 10). Single Machines: a. Volume-fixed Injecting Filling Machine, CJ-12 (2,000 bottles/h, 150-640ml). b. Automatic Filling Machine, ZS-12 (2,000 bottles/h, 1,250ml). c. Gas/water Mixer, Q102-A (1,500kg/h) d. Beverage Mixing Machine, QHS-2500 (2,500kg/h). e. Automatic Capper, YG-6A (2,000 pcs for 250, 375, 500, 640ml bottles). f. Balanced Pressure Filling Machine, GD-12 , gas-containing water or wine etc (1,000 - 4,000 bottles/h) g. Automatic Lid-screwing Machine,YQX-3 (2,000 - 6,000bottles/h). h. Mould-club Filter Series, 101 (1,500kg/h). i. Sodium Ion-exchanging Device, SN2-4 (3,000kg/h). j. Hollow-fibre Ultra-filter Series, YF-1 (2-3t/h). k. Drinking Water Ultraviolet Sterilizer Series, DK (3-4t/h). l. Ozone Generator Series, XG. m. Bottle Washer Series. n. CO2 Filter Series. o. Single-pipe Pulping Machine, DJ-1 (2-4t/h). p. Vacuum Deaerator, TQ-2.5 (2,500kg). q. Parallel-pipe Pulping Machine. r. Vertical Type Cooling/heating Device Series. s. Automatic Rotary Multi-bench Milk Injecting And Sealing. t. Automatic Capping Machine. u. Horizontal/vertical Disinfect Pot Series. 20. PET Bottles Production Lines Complete Plant Equipments for PET Bottle Production Capacity: 10,000 bottles/shift - 100,000 bottles/shift. Volume: 250ml - 1,000ml - 2,000ml - 5,000ml - 19 L, all kinds. Including: injection machine, bottle blowing machines, all moulds. Service: installation instruction, commissioning, test running and personnel training test running and personnel training 21. Brushes Making Machines 1)Aixs NC Brush Tufting Machine CP-103J Single Color 2)Aixs NC Brush Tufting Machine CP-103TJ Double Color 3)Axis NC Brush Tufting Machine, CP-105J Single Color 4Axis NC Brush Tufting Machine CP-105TJ Double Color 5) Compact NC Double Color Toothbrush Tufting Machine CP-2000 6) Compact Toothbrush Trimming and Grinding Machine CP-TM-380 7) BRISTLE TRIMMING MACHINE CP-TM-100 8) Axis NC Brush Drilling Machine CP-108DS 9). BRISTLE TRIMMING CUTTER 22. Concrete Batcher Complete Plant Equipments Capacity: 30t/h, 40t/h, 60t/h and 90t/h. With Germany manufacturing technology and Computer or electronic control systems. 23. Asphalt Hot Mixing Complete Plants Equipments Capacity: 20, 30, 50, 80 and 120 Cubic Meters/Hr. With Computer or electronic control systems.. 24. Aerosol Canning Machine.( The Auto/half Auto Outfit) The Automatic Aerosol Canning Machine has three functions: liquid-canning, sealing and inflating completed in the same machine. With the functions of Auto-submitting the bottles device. Auto-stop Device when no bottles feeding. Half-auto Aerosol Canning Machines: liquid-filling machine, sealing machine, and inflating machine consist of a complete line. The machines are used in the packing of medicine, cosmetics, chemistry products, food, health-protection items. We provide all kinds of packing equipments suitably used with different packing materials, sizes, shapes, and characteristics. 25. Laminate Tube Filling & Sealing Machines These machines are used in the filling ointment materials into cylindrical, capped tubes of Aluminum or lead-tin and seal then tubes ends. In addition to the plunger pump for ointment filling a screw fine adjustment device is provided, so the ointment weighting is accurate. Thanks to the adoption of the sophisticated accurately and reliably, change frequency to control the machine speed. Fukaishen index and international advanced tube sealing systems are used. 26. Canning/filling & Making Machines 1). Whole plant automatic tin can making equipments (complete line) for beverage can, food can, aerosol can, three-piece can, paint can, 0.3 - 5 Gallon oil/paint can, and other cans. 2). Automatic Aerosol Canning/sealing/capping Production Lines (Liquid Filling, Sealing, Gas Injecting, Capping, Washing machine). 3). Automatic Soft Tube Canning/end-sealing Machine (for toothpaste, glue, pastes, etc production). 4). Aerosol Multi-functional Liquid Canning Machine. 27. Ion Plating Production Line Equipments We provide the complete plant equipments of "The ion plating line ", using plasma accelerators is the third generation of ion plating technology and one of the most advanced surface engineering technology and also a profound problem in the complex material field. TG series of ion plating machines are a new product, on one hand, they have electro-magneto metric accelerating plasma, namely plasma accelerator principle and on the other hand, they have several ion sources. 28. Cement equipment 1. Tower Machinery Shaft Kiln Type: 1.2 X 8; 2.2 X 8.5; 2.5 X 10; 2.75 X 10. 2. Tray tower machinery shaft kiln Type: 2.5 X 10; 3 X 10; 3 X 11. 3. Dry rotary kiln Type: 1.65/1.4 X 26; 1.65/1.4 X 33; 1.9/1.6 X 36; 2.2/2 X 40; 2.2/2 X 45; 2.2 X 50; 2.7/1.5 X 54; 2.5 X 40; 2.6 X 60; 3.1/2.5 X 78; 3 X 45; 3.2/2.8 X 50; 3 X 48; 3 X 60. 4. Wet Rotary Kiln Type: 3 X 100.94; 3.2 X 118; 3.5 X 145. 5. New dry Rotary kiln Type: 3.2 X 52; 3.2 X 50; 3.3 X 145. 6. Three-way Coal Spraying 7. Five-stage Preheating Cyclone 8. Wet-adding Tower 9. Cooler Type: 1.5 X 15 - 3.2 X 36. 10. Dryer Type: 1.5 X 12 - 3 X 20. 11. Ball-forming Disk Machine Type: 2500 X 500; 2800 X 550; 3200 X 640. 12. Centrifugal Powder Separator 13. Air Power Separator 14. Rotation Wind Power Separator 15. Rough Powder Separator Type: 1600; 1900. 16. Rotation Wind Separator Type: 2300; 2400. 29. Crushing equipment 1). Cone Crusher, Type: PY600 - PY2200. 2). Hammer Crusher, Type: PC600 X 400 - PC1200 X 1000. 3). Single-Stage Hammer Crusher, Type: TPC14.12 - TPC20.22. 4). PCL1250Vertical Shaft Hammer Crusher PCL1250 5). Impact Crusher, Type: PF500 X 400 - PF1250X 1000. 6). Double-rotor Impact Crusher, Type: 2PF?1000 X 1000 - 2PF?1800 X 2000. 7). Jaw Crusher, Type: PEF250 X 400 - PEF600 X 900; PEJ900 X 1200; PEX150 X 750 - PEX900; PE250 X 750 - PE1200 X 1500. 30. Mill Machines 1). Ball mill, Type: 1500 X 1500, - 2200 X 9000. Wer-grate, overflow, dry-grate, drying and white cement types 20 ). Tube mill, Type: 2200 X 9000, - 2400 X 12000. Central driving and end driving. 2400 X 13000, - 2400 X 13000. 3). Drying Raw Material Mill, 3.2 X 7 + 1.8 Drying Mill 4). Vertical mill, Type: LM1250 & LM1300. 5). Ceramic Grinder 3000 X 5000 6). Coal Grinder, Type: 1.3 X 2.4 - 1.7 X 2.5; 220/260 - 380/830; ?2.2 X 4.4 -?2.8 X 5+3. 7). Swing Grinder 4R3216 8). Ball-unloading Unit , Type: FJ2.0 - FJ-380. 9). Hydraulic Jack, Type: FJ1 - 1 - 250, FJ1 - 2 - 380. 10). Additional Driving, Type: QM2947.08 - QM3872.08. 31. Colorful Ribbon Weaving Machine. Complete Colorful Ribbon Weaving Machines, ribbons are for holiday gifts packing, toys packing, decorative uses at home, Christmas trees etc. 32. Charcoal Production Line Equipments We provide the complete charcoal production line equipments Capacity: 300MT/Year; 600MT/year, 1200-1500MT/year. Raw Materials: sawdust, peanut shell, rice husk, cane waste and straws. Charcoal Value: 7000 Kcal/kg, min. Carbon content: 75% - 80%. Fuel: coal, wood, gas, and oil etc. Voltage: 220V/380V, 50Hz. Charcoal quality meets the National Standard. 33. Production Equipments of Facial Tissue Paper, Toilet Tissues Paper, Protective Pad, Sanitary Napkin and Baby Diapers: 1) MH- 150-275 Series Tissues Machine. 2). MH-909 Mini Tissue Production Machine. 3). MH-888 Automatic Wet Tissue Production Machine. 4). MH- 200 Square production Machine. 5). MH 1092 - 1575 Rewinding Paper Slitting Machine 6). MH-1092-1575 Rewinding and perforating Napkin production Machine. 7). MH-180 Napkin Core production Machine. 8). MH-878 Auto Super-thin Winged Medicine Sanitary Napkin Production 9). MH-898 Auto Winged Sanitary Napkin Production Machine 10). MH-145H Auto Protective Pad Production Machine. 11). MH- Baby Diaper Production Machine. 34. Hand Sprayers & Auto-Sprayers --- Hand Sprayers: Volume: 3.8L; 5L; 6L; 7.5L; 8L; 15L; 16L; 18L; 20L. Complete plastic made. --- Auto-Sprayer(with motor) Volume: 10L; 15L. Steel & plastic made. 35. Machines Diamond PCD Blanks Making. We provide the complete machine for diamond crystal and diamond PCD blanks making machines, with related software/know-how, personnel training, after-selling service, and spare parts supplying.

Showroom URL

You are visiting: http://www.worldbid.com/times666
Bookmark this page to return at a later time.

Click here to forward this showroom to a friend!