HAND TOOLS |
 |
 |
 |
 |
KS-03
zipper tool case coming with 125mm Nippers, Long Nose Pliers, 3 sizes of philips Screwdrivers, slotted Screwdriver, Alignment Driver, Tweezers, 30W So |
 |
 |
|
DA-48/50/51/52 Ceramic Driver
4-in-1 Slotted Tip & Hex Core Ceramic Driver ideal for alignment of trimmers, capacitors, resistors, etc. on S.M.D. Fine & durable Zirconia ceramic i |
|
 |
|
 |
|
PA-01
6-in-1 Multi-purpose type Wire Pliers. O.A. Length: 245mm. Function A) for Crimping bare terminal, B) for Crimping insulated terminal, C) for Crimp |
|
 |
|
SS-01/02
Solder Sucker designed to suck up melted solder by single-action plunger. Made of aluminum cylinder coming with Self-Cleaning Shaft and dia.2mm(SS-0 |
|
|
|
 |
|
SL-71
Lighting Loupe with x10 magnifying lens of dia.30mm & built-in 20mm scale. Light beam illuminates magnified area. O.A. Length 177mm |
|
 |
|
NS-03/04
Micro Nippers ideal for precise & high density S.M.D. work. 125mm Model NS-03 & 115mm Model NS-04. Material: High Manganese Vanadium Steel. |
|
|
|
 |
|
PT Series Tweezers
Stainless Steel(SUS304) Tweezers featuring anti-magnetic & anti-corrosive. The picture shows Model PT-07. There are lots of variation of material, |
|
 |
|
PA-15
Connector Crimping Pliers for open barrel terminal featuring Double Action Mechanism. It enables you to crimp lead wire portion & sheath portion by |
|
|
|
 |
|
SL-02/03
35mm dia. Inspection Mirror with telescopic rod. Ball-point Joint enables you to adjust the mirror angle as you wish. Model SL-02's Rod extendable f |
|
 |
|
DR-06
Offset Ratchet Driver Set. Offset Handle with built-in quick ratchet device. 10-in-1 Tip Set consists of #00, #1, #2, 4.5mm Slotted, 6mm Slotted, 1. |
|
|
|
 |
|
DK-06
Interchangeable Driver Set with circuit testing driver handle. Bit assortment consists of philips #1, philips #2, slotted 3mm, slotted 5mm, Nut 5.5m |
|
 |
|
SS-31/33
Pin Extractor. The ejector rod inside the sleeve enables you to knock out both male & female pin easily from socket terminal. Outer diameter of slee |
|
|
|
 |
|
PZ-01/02
E-Ring Pliers ideal for removal and replacement of E-ring. 150mm Model PZ-01 is suitable for Ring Size 3~5mm and 165mm Model PZ-02 is suitable for R |
|
 |
|
SS-08/10
IC Extractor (Model SS-08) & P.C.Board Connector Extractor (Model SS-10). Our extracting tools are must for re-work on S.M.D. and they are especially |
|
|
|
 |
|
PA-08/10
Connector Crimping Pliers for open barrel terminal featuring Double Action Mechanism. It enables you to crimp lead wire portion & sheath portion by |
|
 |
|
KS-08PC (New Model)
Electronics Tool Kits especially for Personal Computer Maintenance. Contents: Torx Drivers (4 sizes), Philips Drivers (2 sizes), Slotted Driver, 5.5m |
|
|
|
 |
|
TWH & TWB Series
7-in-1 Hex Key Wrench Set (Metric Size Model TWH-01 & Inch Size Model TWH-02).
8-in-1 Ball Point Hex Wrench Model TWB-01. |
|
 |
|
PZ-55 (New Model)
Screw Pliers specially desinged for 1)Screw encrusted with rust, 2)Screw whose head was damaged or transformed & 3)Screw whose slot on the head is spe |
|
|
|
 |
|
Stainless Steel Pliers
#PSS-02: 120mm Needle Nose Pliers
#PSS-03: 110mm Flat Nose Pliers
#PSS-04: 110mm Flat Nose(Curved)
#PSS-05: 110 |
|
 |
|
TP-35/36
Magnetic Pick-up Tools equipped with Flexible Shaft. Ideal for retrieving parts in hard-to-reach area. Overall Length: 400mm(Model TP-35) & 530mm( |
|
|
|
 |
|
TR-01~04
Taper Reamer made of SK3 steel. Model TR-01 for dia.3~12mm hole, Model TR-02 for dia.4~16mm hole, Model TR-03 for dia.5~20mm hole & Model TR-04 for d |
|
 |
|
SL-55/56/57
Inspection Loupe with built-in & detachable square scale. The focus is adjustable by sliding lens sleeve. 10x Model SL-55, 15x Model SL-56 & 22x Mo |
|
|
|
 |
|
PS-01/04 & PL-05
Model PS-01:125mm Miniature Long Nose Pliers. Model PS-04:125mm Miniature Flat Nose Pliers without serration. Model PL-05:Stainless Steel 125mm Flat |
|
 |
|
PR-15/26/36/46
Long Nose Pliers. Model PR-15:125mm with wire cutter. Model PR-26:150mm with wire cutter. Model PR-36:150mm with wire cutter/stripper & nut fastene |
|
|
|
 |
|
NS-06
105mm Micro Nippers. Undercut design of sharp edge is ideal for work on complex S.M.D. Equipped with coil spring & opening angle adjuster. |
|
 |
|
KS-06
Maintenance Tool Kit (20-in-1). Contents: Nipper, Long Nose Pliers, Side-cutting Pliers, Combination Pliers, Tweezers, Philips Drivers(3pcs.), Slotte |
|
|
|
 |
|
DR-08
Stubby Ratchet Driver Set with Flexible shaft. Easy access to tighten screws & nuts at hard-to-reach positions. Coming with 6-in-1 bullet type bit |
|
 |
|
DA-53~59 Ceramic Driver
Zirconia Ceramic Drivers ideal for alignment of trimmers, capacitors, resistors, etc. Two-in-one (slotted tip & hex core) pen-type. Model DA-53(0.4x |
|
|
|
 |
|
NZ-03/05
Chip Cutting Pliers ideal for re-work and maintenance on surface-mounted I.C., Chip Resistance, etc. 4.5-inch compact & slim design. Equipped with |
|
 |
|
DK-13
Compact & Reversible type Precision Driver Set, whose shaft length is adjustable 18~100mm. Magnetized driver's bit (Bit Length 125mm). #00, #0, -2.5 |
|
|
stereo microscope |
|
|
 |
|
SL-60
Illuminated Stereo Microscope with magnification x10/x20 switchable. Our Model SL-60 is suitable for inspection & re-work on S.M.D., P.C.Board, micro |
|
|
|
|
TESTING EQUIPMENT |
|
|
 |
|
SD-06
MULTI-METER WITH BUILT-IN TEST PROBES.
AC/DC VOLTAGE MEASUREMENT, RESISTANCE MEASUREMENT, DIODE TESTING & CONTINUITY CHECK CAN BE MADE.
FEATURING PO |
|
|
|
|
Screwdrivers |
|
|
|
|
DA-48/50/51/52 Ceramic Driver
4-in-1 Slotted Tip & Hex Core Ceramic Driver ideal for alignment of trimmers, capacitors, resistors, etc. on S.M.D. Fine & durable Zirconia ceramic i |
|
 |
|
PRO-GRIP & SOFT-GRIP DRIVERS
Our Pro-Grip Drivers provide excellent tightening power owing to hand-fitting design. Shaft length from 100mm to 300mm is available and all with magn |
|
|
|
 |
|
DR-51
Master Grip Driver Set for Torx Screws. 6 double ended torx bits fit 12 different screw size from T-5 to T-40. Bit set consists of 110mm-long bits |
|
 |
|
DK-60
6-in-1 +-Precision Driver Set containing #000, #0 & #1 philips and 1.8mm, 2.3mm & 3.0mm slotted types. |
|
|
|
|
|
DA-53~59 Ceramic Driver
Zirconia Ceramic Drivers ideal for alignment of trimmers, capacitors, resistors, etc. Two-in-one (slotted tip & hex core) pen-type. Model DA-53(0.4x |
|
|
|
|
Soldering iron |
|
|
 |
|
Gas Soldering Iron
KOTELYZER. Cordless Soldering Iron operated by gas fuel ideal for field maintenance. No electricity is needed. One touch ignition and quick heat-up |
|
 |
|
Gas Soldering Iron
New-fashioned & Advanced design of Cordless Soldering Iron (Kotelyzer). Model SKM-40 is equivalent to 20~60W electric soldering iron. It can be used |
|
|
Static Control products |
|
|
 |
|
ANTI-STATIC PRODUCTS
Anti-static wrist strap (Model ZC-50) equipped with 1 mega-ohm resistor.
Anti-static gloves (ZC-51~53 Finger Coating & ZC-54~56 Palm Coating).
Both |
|
 |
|
ZC-60/61
Static-Dissipative Mat ideal for work in E.S.D.-restricted area. Featuring the surface resistivity of 790 mega-ohm and anti-fatigue rubber cushion. |
|
|
Home / Showrooms / Category Showrooms / Showroom Home
