Crc 3 36 Corrosion Inhibitors - India

1 - GENERAL DESCRIPTION

Multi-purpose lubricant and corrosion inhibitor.

CRC 3-36 is based on a paraffinic oil and a multiple organic inhibitor system that prevents rust and corrosion by displacing and sealing out moisture and by forming a continuous protection barrier against water and oxygen.

The oily, almost invisible film of CRC 3-36 lubricates and penetrates into the finest pores and cracks of the surface.

CRC 3-36s effectiveness for surface protection is derived from three of its principal properties :

affinity for metal

low surface tension

high capillary action.

By its affinity for metal and low surface tension CRC 3-36 displaces moisture and separates it from contact with the metal surface.

The high capillary action contributes to the great spreading power.

2 - FEATURES

Multi-purpose lubricant, penetrant and corrosion inhibitor

Displaces and seals out moisture, especially after washing or hosing off engines or equipment

Penetrates through corrosion to loosen frozen parts

Lubricates without leaving a sticky residue

Cleans light soils and contaminants

Prevents 'fingerprinting' by its protective film

Protection of all metals and alloys

Compatible with most painted surfaces, coatings, plastics and rubbers

Equipped with the 360 (upside-down) spray valve for added convenience

Pressurised with non-flammable CO2 propellant

Active product content of 97%

Specifications :

NSN 6850-00-050-0659

USDA class H2

3 - APPLICATIONS

For new, in service or stored equipment.

PROCESS MANUFACTURING :

- Heat treated parts

- Machined surfaces

- Finished welds

- In-process aluminium extrusions

- Precision mechanisms

MACHINING :

- Fixtures

- Dies

MATERIAL STORAGE

- Tubings

- Castings

- Gears

- Weld rod and wire

MAINTENANCE

- Air actuated tools

- Conveyors

- Frozen joints

- Locks

- Hoists

4 - DIRECTIONS

Spray in light, even films to lubricate and protect metal surfaces.

For electrostatic spraying, addition of polar solvents (butanol, nitropropane, .

) may be necessary.

Apply liberally and allow to penetrate to free rusted parts.

Full penetration may require several hours.

To displace moisture, spray wet surfaces until run-off is clear and moisture-free.

To be removed by solvent cleaners (CRC Industrial Degreaser, CRC Fast Dry Degreaser, .

) or alkaline degreasing before surface treatment.

For application of CRC 3-36 in dipping baths, customers should take care to stir from time to time (to distribute small amounts of deposits) and to prevent excessive evaporation of solvent.

When stable emulsions have been formed, the bath should be emptied and cleaned, and the product replaced.

Do not use on energized equipment.

Use in a well ventilated area.

A safety data sheet (MSDS) according EU-Directive 93/112 is available for all CRC products.

5 - TYPICAL(*) PRODUCT DATA (without propellant)

Appearance : blue-green, clear

Specific gravity (@ 20C) : 0.83

Distillation range of solvents : 190-250C

Freezing point : -50C

Flash point (open cup) : 78C

Dynamic viscosity (@ 20C) : 3.9 mPa.

s

Ultimate film thickness : 2.10-6m.

(@ 20C, after a 24 hr spread)

Maximum expected coverage : 100 m2/l.

Company Contact:

• Posted By: Jay Agenciez

• Phone: 9825116952

• Address: 15, Dhamanwala Complex, Opposite Batliboi, Pandesara, Surat , Gujarat , India

• Email:

• Website: https://www.jayagenciez.com

• Business Description: We are offering Devcon Putty, Devcon Epoxy Putty, Devcon Cold Welding Products, CRC, Aquafix, WD 40, Molykote, Polygrip brand Rubber Adhesives ( Atul ltd), Silicon Sealants, Chain Pulley blocks, Crosby lifting equipments, ALLSAFE Slings, Zero Leak Brand Gland packing and Fire resistant cloths, welding accessories, Safety Equipments, Industrial Safety Equipments, Welding Electrodes, Safety Items etc.